New System........... problem

[1989se-i]

FINALLY i put in a new cd playah and amp, i used to have the stock radio/cassette, with no amp.

Anyway, it works great, except 1 thing: Everytime i turn off the car, all the stettings are erased (ie: clock is always at 12, eq is flat, preset stations=reset)

...I mustve wired sumthing wrong?

[Bobs89LXi]

You probably forgot to connect the memory power wire. It is a separate line that keeps power to the memory, thus saving your settings. Check the installation instructions. It can be spliced into the head unit power line.

[shepherd79]

there are two power wires.
one is constant and the other one for the ignition switch.
constand wire should be connected to the battery or constant possitive.

[1989se-i]

Excellent..... :Imitates Mr Burns:

[smufguy]

and its usually the yellow one, if i am not mistaken.

[88' Accord Ltd]

yah the yellow wire from the back of the deck is for constant power and red is the accessory.

[RL89LXi]

also check the fuses under the hood, once I wired everythign right but I blew a fuse, so the constant power wire wasnt gettign any power.

[My 89 Accord Lxi]

mine did that too exept my radio go power the screen would light up but no soound or picture and my clock always reset but i found out it was the fuse under the hood

[1989se-i]

On the stock wiring harness, which color is the constant power?

[My 89 Accord Lxi]

yellow and white i think

[jigga225]

yep yellow and white is right.......
but wait... if youre searching for that yellow and whitewire that means..............
NOO u cut the factory wirin harness didnt you didnt you!

[socal3rdgen]

hmm i had the same problem. my clock kept reseting and i figured out it was the fuse under the hood . just check them and replace as noted. it the accessory wire is connected.

btw. jigga i hope your not right cuz that would suck for him.

[1989se-i]

:( :crying: yes i cut the harness :( IM SOOORRY!