PDA

View Full Version : Temp guage stopped working



MoDawG
11-23-2007, 03:25 PM
Hey guys I noticed my temp. guage inside the car stopped working. I know its not the sensor, is there any springs or something in the back?

2oodoor
11-23-2007, 03:50 PM
if you are sure it is not the sensor, how about the thermostat, could be stuck open.

forrest89sei
11-23-2007, 03:53 PM
Yeah Test the Sensor.

Heres How From the Service manual:

http://img266.imageshack.us/img266/7285/tempgaugemediumtq4.jpg

BTW LX-i is = to the Canadian EX-i

88Accord-DX
11-23-2007, 09:12 PM
That test is for the gauges, to test the sensor. Run the engine to operating temperature at 190 degrees & see if you have continuity to ground with a Digital Volt Meter set on ohms reading. Go from there.

coope
11-23-2007, 09:44 PM
its the sending unit there cheap at the auto parts store

MoDawG
11-23-2007, 09:58 PM
I forgot to mention (my guage cover is broken) and I was playing with the temp guage lol

forrest89sei
11-23-2007, 10:05 PM
I forgot to mention (my guage cover is broken) and I was playing with the temp guage lol

Well Then you might need a new Guage

Playing with them tends to break them

2oodoor
11-24-2007, 03:22 AM
I forgot to mention (my guage cover is broken) and I was playing with the temp guage lol

:dunno: "LOL" ?

MoDawG
11-24-2007, 02:32 PM
So do I need a whole new cluster?