Rear Shock mount bushings? Options?

[AccordEpicenter]

Okay im finally doing the suspension on the accord while the engine is apart, everything is going good except the rear shock mount bushings in the knuckles are shot, so i chisled them out no prob, but what can i get to replace them? I know i could go oem honda but what else do we have? Ive seen legend masters thread about his but the kit costs $100 which is a waste for just the 2 bushings we can use from it, does anybody have any poly bushings thatll fit? What about aftermarket non honda, any decent bushings out there? Help me suspension masters!!

BTW: The suspension is revalved bilsteins on weapon R circuit pro coilovers, 500lb/in front, 375 lb/in rear (yes i know its stiff, i need it for racing), poly radius rod bushings, poly front swaybar bushings, i may go with camber kits but i dont feel the need to drop it very much, maybe 1.5" not sure yet

Edit: This entire setup soo far has cost me less than $400

[bobafett]

good thing you have the coilovers so you can raise your car up to make room for tires. :)

[russiankid]

I would go with OEM bushings. When i did my rear disc swap i replace mine with OEM ones and no problems. I do however have a stock suspension setup, but they should be fine. My 2 cents.

[2drSE-i]

buy the poly kit and sell the other three sets. Ill buy one of them off of ya, im sure someone else will too.

[bobafett]

does se-i and lx-i use the same bushings here? if so I will take a pair too if somebody has to order a set of 4 pair.

[LX-incredible]

does se-i and lx-i use the same bushings here? if so I will take a pair too if somebody has to order a set of 4 pair.
They're the same. I would also be down for a set.

[2drSE-i]

there ya go, thats all four pairs haha. so 25 each and someone needs to split them up and ship them out.

[AccordEpicenter]

okay, Ill get the kit and sell the rest i guess lol. I gotta order prothane radius rod bushings anyway...

[knarg]

i will buy some

[MessyHonda]

i still got to install mine

[AccordEpicenter]

i ordered a box, ill let you guys know when i get them in and ill sell off the ones i dont need

[2drSE-i]

awesome

[bobafett]

yeah lmk I just got paid so now is a good time to get you back for them. :)

[88LXi68]

BTW: The suspension is revalved bilsteins on weapon R circuit pro coilovers, 500lb/in front, 375 lb/in rear (yes i know its stiff, i need it for racing)

If the springs are the same height put the front springs on the REAR. That would help stick the nose on launches.

[LiTtLe xOx BitT]

I still have mine sitting around if anyone is interested.

[AccordEpicenter]

ok i finally recieved mine, they were backordered forever. I have 3 pair left, up for grabs, $25 shipped per pair. Posted in marketplace!