Seat Removal Diagrams Please!!!!!!!!!!

[lgoldtop]

hey guys,

i just got new racing seats from APC and im going to take out my old seats so i can put the new ones in but i dont know how so i was wondering if any of you could tell me how to do it with out breaking anything thanks!!!

[A18A]

remove the 4 14mm bolts

[labeledsk8r]

remove the 4 14mm bolts

yep... lol


you do know those APC seats will not bolt directly in right?? you have to make custom brackets...and if your haveing trouble removeing stock seats.... well... all i can say is good luck... oh and once you get them fitted you will notice there a bit to wide for the car lol

[AccordB20A]

do u wanna know how to get the seats out of the car easy, Open the front door and pull it out that way in its normal position.

[itzdave]

yea, just look at the bottom of the seat, u will see a big bolt, take it out, repeat on all corners, then pull seat out. ya might have to slide the seat forward to get the back bolts.

[knarg]

i have 2 apc seats. should i actually use them... or throw them away lol

[labeledsk8r]

i have 2 apc seats. should i actually use them... or throw them away lol

option 2 might be a better bet lol,... they realy dont fit well at all in the accord

[turabaka]

plus they're APC

[Civic Accord Honda]

i have 2 apc seats. should i actually use them... or throw them away lol
nah dont thow them away and dont sell them give them to cah for Xmas ;)

[AccordB20A]

*waits fort a18a to try and get them for free aswell*

[A18A]

send them to cah






har har

[coope]

u need mounts thats the hard part i want integra seats fuck apc i thought they went out of buisness enyway

[race12001]

i think they did cause no can sell their shit so it still sit on the shelf for someone to buy in 20yrs when rice is back in

[MessyHonda]

if you want good seats you need to spend at least 700 bucks


i got quoted for that plus brackets....for 700 bucks i might as well get light weight rims.

[stat1K]

700 huh? i'd just get the nrg seats they are pretty legit. http://www.getnrg.com/products/index.php#block3 the cloth ones that are typeR replicas.

[MessyHonda]

700 huh? i'd just get the nrg seats they are pretty legit. http://www.getnrg.com/products/index.php#block3 the cloth ones that are typeR replicas.



yeah i think they want like 500 for the pair and like 190 for brackets that fit our car plus tax...im thinking of going with prelude seats.

[stat1K]

meh you could make your own brackets pretty easily but don't the teg seats almost line up? couldn't you always just swap the seatpans?

[lgoldtop]

yeah i just took out the passenger seat and i put the racing seat in and i had MORE than enough room to fit them plus the APC seats arent that bad i got them for free from my dads best friend they fit, there the color i want, they look good so im not complaing but eventually when i have more money ill get better seats but until then im happy with what i got

[labeledsk8r]

yeah i just took out the passenger seat and i put the racing seat in and i had MORE than enough room to fit them plus the APC seats arent that bad i got them for free from my dads best friend they fit, there the color i want, they look good so im not complaing but eventually when i have more money ill get better seats but until then im happy with what i got

do you have a 4 door? becuse i have only seen them in a coupe.. and you couldnt even adjust the seat without opening the door... mayby theres more side to side room in the 4 door then the coupe?? dunno.. glad you got them in

[lgoldtop]

yeah i got a 4 door thats probably why thanks

[HondaBoy]

hmm. most apc seats i've seen are rather large for a 3gee. i dunno about those. i would have gone with prelude seats if i were you. but thats me and i did put prelude seats in my 3gee. they are comfortable, lower than accord seats, and bolted directly in on the accord seat brakets.

[[LoD]Miseryland]

Anyone else have to angle grind the inner rear bolts to reattach their seats?
Im just askin because the bolts in mine were these stupid things that resemble a threaded rod, with a nut welded in the middle

Beware, horrible ascii art incoming

1 ____
1 | |
1 | |
1 __| |__ <i cut off here lulz
1| |
1|__ __|
1 | |
1 | |
1 | |
1 |____|
Ascii art is epic fail
http://i229.photobucket.com/albums/ee306/LoDMiseryland/my%20car/accordseatbolt.jpg

[A18A]

LOL @ that pic

[knarg]

hahaha that was awesome


...if anyone wants 2 apc seats, i'll give em away cheap