PDA

View Full Version : My B20a is F##ked



TWOLOUDNPROUD
12-29-2007, 03:52 PM
Well this is what happen my crank bolt came loose and the crank pully caused pin to sheared a piece of the crank off where the pin grove is. So the crank is toast so next week i am going to pull out my b20a and put my other b20a in that the one that has the web cams apr head bolts well this one but with out the turbo on it for right now
http://memimage.cardomain.net/member_images/11/web/359000-359999/359877_302_full.jpg

forrest89sei
12-29-2007, 04:09 PM
SHIT!

Sorry to hear that!!

Least you have a Spare

A18A
12-29-2007, 04:11 PM
eyah that sucks, but also good thing you have a spare one right?

Civic Accord Honda
12-29-2007, 04:11 PM
:(

TWOLOUDNPROUD
12-29-2007, 04:16 PM
eyah that sucks, but also good thing you have a spare one right?

yes that the one i going to put in and i going to rebuild the b20a that comming out i get a new crank from a b20a5 and it will be all good.

2oodoor
12-29-2007, 04:16 PM
can you jb weld the gap and then weld the pulley on, then get a little use outta it?

TWOLOUDNPROUD
12-29-2007, 04:17 PM
can you jb weld the gap and then weld the pulley on, then get a little use outta it?

it's past that point to much of the crank is missing.

TWOLOUDNPROUD
12-29-2007, 04:35 PM
You know what sucks i just got a bin file from a guy off Preludepower for my b20a that runs 450.cc injectors on a stock b20a and he was running 13th in the 1/4 mile and i put it in to day and it was running sweet to.

bullard123
12-29-2007, 04:59 PM
yes that the one i going to put in and i going to rebuild the b20a that comming out i get a new crank from a b20a5 and it will be all good.
Hey I have a crank from a B20A5 I can sell you. Ill post pics if you want

thegreatdane
12-29-2007, 05:20 PM
This picture from your other thread wasnt a good sign either. The thread has been stripped already at this point:
http://i109.photobucket.com/albums/n80/TwoLoudNproud/DSCN6803.jpg

13's with a stock B20A is impossible unless the weight of the car has been cut in half or less. And you have no use for 450cc injectors on a stock engine. I hope you mean it was a turboed stock engine.

2oodoor
12-29-2007, 05:40 PM
F U B A R if it is that big a chunk, man o man,, sorry

TWOLOUDNPROUD
12-29-2007, 06:00 PM
This picture from your other thread wasnt a good sign either. The thread has been stripped already at this point:
engine. I hope you mean it was a turboed stock engine.

i had it fixed but i did not do a good job on tighting the bolt i screwed up.

13's with a stock B20A is impossible unless the weight of the car has been cut in half or less. And you have no use for 450cc injectors on a stock engine. I hope you mean it was a turboed stock engine.
There is a huge power difference when i put the 450cc injectors and the bin file it was like WOW and i like it i can't wait for the track to open to try it out.

Pico
12-29-2007, 07:41 PM
Damm :(

russiankid
12-29-2007, 07:41 PM
Wow scary stuff, i have my timing belt off right now kinda scary hearing this. How did it come loose?

TWOLOUDNPROUD
12-29-2007, 08:06 PM
shit happens

A18A
12-29-2007, 09:53 PM
shit doesnt just happen, an asshole creates it. sorry sorry i was told to say that

TWOLOUDNPROUD
12-29-2007, 10:32 PM
shit happens when you let it happen this last month i had like a million things going on then i had to fix the trany and the crank pulley i should made sure the dam bolt was tight. i usually check it the next day but i didn't this time and look what happen.

TWOLOUDNPROUD
12-30-2007, 01:16 AM
Here the pulley
http://i109.photobucket.com/albums/n80/TwoLoudNproud/DSCN6806.jpg

AccordB20A
12-30-2007, 01:59 AM
dam that sucks. problem after problem for you. Must be making good power:)

TWOLOUDNPROUD
12-30-2007, 12:45 PM
dam that sucks. problem after problem for you. Must be making good power:)

Like i said before i sometimes have Al Bundy luck one little good thing happens then i get a shit load of bad luck to go with it.
http://www.saverpit.com/movies_tv_1/al_bundy.jpg

TWOLOUDNPROUD
12-31-2007, 02:07 AM
http://www.partsamerica.com/product_images/img/rop/01530.jpg

86ccord
12-31-2007, 04:21 AM
dude.. that sucks really bad..

i found it quite funny that you just have another B20 just hanging out.. hehe you should donate to me :]

TWOLOUDNPROUD
12-31-2007, 12:53 PM
dude.. that sucks really bad..

i found it quite funny that you just have another B20 just hanging out.. hehe you should donate to me :]

all together i have three B20a :)

forrest89sei
12-31-2007, 01:00 PM
all together i have three B20a :)

Yes Tommy is the B20 Man of Nor Cal, and maybe all of California.... :O

Oh and I FINALLY Got that GD Hyrdo Mount out of my LX, I'll take a pic for you later, Send me a couple bucks for shipping and it's yours

RobT5580
12-31-2007, 09:25 PM
I can feel a big difference running a stock b20a on a stock a20 ecu. My b20at non turbo on my aem tuned ran 100x better.

Sucks your having all these issues!

AccordB20A
12-31-2007, 10:18 PM
B20a Runs better on a20a ecu?!?!?!?!? someone shd give me one then...oh and why?!

MessyHonda
01-01-2008, 12:14 AM
lol....my p06 makes my car run better....i might go drive the lx-i.

bullard123
01-01-2008, 07:22 AM
B20a Runs better on a20a ecu?!?!?!?!? someone shd give me one then...oh and why?!

I think that was a typo. I don't think there is any way possible for a ecu rated for 130hp engine make a 140 or 160 hp engine run better

RobT5580
01-01-2008, 08:04 AM
My tuned AEM EMS made it run 100x better it says. Im running a completly stock b20a on a stock ecu and it is sluggish. The emissions tester actually gave it a compliment for the torque only if it was still turbo charged would he really know. You certainly can feel the torque difference over the a20a3 without a doubt.

I was considering doing a high compression n/a setup but it would take close to the same amount of money given the parts i have already so im working on my next turbo build. I thought n/a would have enabled me to finish it sooner but between tuning, custom, header, dp, and exhaust i would be close to the same cost as going turbo give or take 1k-2k depending on what turbo i use.

TWOLOUDNPROUD
01-01-2008, 11:03 PM
Update it all most ready to go in.
http://i109.photobucket.com/albums/n80/TwoLoudNproud/DSCN6827.jpg
550cc injectors
http://i109.photobucket.com/albums/n80/TwoLoudNproud/DSCN6826.jpg
68mm TB
http://i109.photobucket.com/albums/n80/TwoLoudNproud/DSCN6829.jpg
Web Cams
http://i109.photobucket.com/albums/n80/TwoLoudNproud/DSCN6828.jpg

A18A
01-01-2008, 11:13 PM
:thumbup: looks good

AccordB20A
01-02-2008, 01:20 AM
your thumb up didnt work... at least here it didnt. But hes right it is looking good.

forrest89sei
01-02-2008, 01:35 AM
NICE LOOKING SETUP! :thumbup:

A18A
01-02-2008, 01:44 AM
yeah smileys dont work in the jdm section :(

AccordB20A
01-02-2008, 12:35 PM
so does it go yet? it looks very clean under there

thegreatdane
01-02-2008, 12:54 PM
yeah smileys dont work in the jdm section :(

That's cos smileys aint JDM dude! :) :) :) :)

HondaBoy
01-02-2008, 02:02 PM
well this looks like a nice swap. i know the last setup was really sweet but this one looks like it'll run real nice. any vids to come?

TWOLOUDNPROUD
01-02-2008, 05:38 PM
This is how you put a civic power steering pump on a B20a.
http://i109.photobucket.com/albums/n80/TwoLoudNproud/DSCN6833.jpg
http://i109.photobucket.com/albums/n80/TwoLoudNproud/DSCN7038.jpg

TWOLOUDNPROUD
01-02-2008, 05:47 PM
yeah smileys dont work in the jdm section :(
Yes they dohttp://www.3geez.com/forum/images/smilies/rock.gif

TWOLOUDNPROUD
01-02-2008, 11:41 PM
Bump

A18A
01-03-2008, 12:14 AM
Yes they dohttp://www.3geez.com/forum/images/smilies/rock.gif

http://www.3geez.com/forum/images/smilies/orly.gif

TWOLOUDNPROUD
01-03-2008, 01:29 PM
http://www.3geez.com/forum/images/smilies/orly.gif

http://smiliesftw.com/x/2girls.gif

carotman
01-03-2008, 09:43 PM
This is how you put a civic power steering pump on a B20a.
http://i109.photobucket.com/albums/n80/TwoLoudNproud/DSCN6833.jpg

Nice stuff!!

coope
01-03-2008, 11:34 PM
http://smiliesftw.com/x/2girls.gif

that is sick Cupgirls lol

TWOLOUDNPROUD
05-13-2008, 11:12 PM
http://i109.photobucket.com/albums/n80/TwoLoudNproud/th_PICT0009.jpg (http://s109.photobucket.com/albums/n80/TwoLoudNproud/?action=view&current=PICT0009.flv)
http://i109.photobucket.com/albums/n80/TwoLoudNproud/th_Movie2.jpg (http://s109.photobucket.com/albums/n80/TwoLoudNproud/?action=view&current=Movie2.flv)

forrest89sei
05-13-2008, 11:12 PM
Sweet :D

Hauntd ca3
05-14-2008, 12:07 AM
she certainly gets round the speedo quik eh and that motor vid brings back memories
that tappety b20a idle is a sweet sound

knarg
05-14-2008, 12:31 AM
Sweet :D

gfrg88
05-14-2008, 07:15 AM
Sweet :D

AccordB20A
05-27-2008, 07:24 PM
SoOOOooOOOoo any updates on this b20 turbo beast??

TWOLOUDNPROUD
05-27-2008, 10:38 PM
SoOOOooOOOoo any updates on this b20 turbo beast??

Pop the F"ing head gasket and the new head gesket wont be here untel next weekhttp://3geez.com/forum/images/smilies/pffft.gif

AccordB20A
05-27-2008, 11:06 PM
thats no good how did the gasket blow

TWOLOUDNPROUD
05-27-2008, 11:14 PM
thats no good how did the gasket blow

It was a cheap ass Federal Mogul gaskey kit i usedhttp://www.3geez.com/forum/images/smilies/badpc.gif But this time i ordered a AJUSA head gasket that one will hold up.