Weber Adapter Port Matching

[2ndGenGuy]

So after being inspired by this post tonight:

http://www.3geez.com/forum/showpost.php?p=851688&postcount=5

I decided to give a shot to port matching the intake manifold to the Weber adapter plate before installing the manifold on the car.

Here's the stock manifold...

http://i66.photobucket.com/albums/h256/jgturk/1g/DSC01368.jpg

With the Weber Adapter...

http://i66.photobucket.com/albums/h256/jgturk/1g/DSC01370.jpg

Lil bit of cutting...

http://i66.photobucket.com/albums/h256/jgturk/1g/DSC01372.jpg

Lil more shaping...

http://i66.photobucket.com/albums/h256/jgturk/1g/DSC01375.jpg

The intake port on the manifold was WAY bigger than on the adapter, and so I smoooothed it all out.

http://i66.photobucket.com/albums/h256/jgturk/1g/DSC01383.jpg

http://i66.photobucket.com/albums/h256/jgturk/1g/DSC01385.jpg

http://i66.photobucket.com/albums/h256/jgturk/1g/DSC01381.jpg

http://i66.photobucket.com/albums/h256/jgturk/1g/DSC01389.jpg

I did the roodoo2 style chopping of the divider and made it a U shape. Mostly for airflow reasons, but I cut a good portion of it out. I wasn't really sure how to get all the way up into the mainfold, since I don't have the attachement on the dremel that lets you get in really deep.

There are now no more edges anywhere from the top of the carb base down. You can't feel any lips, burrs or transitions that aren't smooth. I'd say for 4 hours of work, I'm pretty happy with how it turned out. :cheers:

[forrest89sei]

That looks pretty Awesome :D

[2oodoor]

accel-ent :cheers:

[Hazwan]

Sweet! I want one!

[AccordB20A]

Good work john, Looks like i wasnt the only one making alloy flakes with a dremel yesterday haha