team delsol sight down

[THEBlakAcc]

I was trying to view the sight to build a coldair intake and its down... does anyone remember the parts needed and the steps necessary to build a coldair intake.?

Let me know so can go ahead and order the parts.!!

[89accordlxi]

I think the page has been moved somewhere else and that site doesn't seem to be working either..
The pipe is from JCwhitney for $22.95 plus s/ h.
The part number is 81ZX3035N

Use the picture from the how-to to cut the pipe. Then use high temp ceramic based spray paint to paint the pieces inside and out if possible. Then go to the hardware store and buy the right amount of 2" hose clamps and Voila.... then it is just a matter of installing it. You will have to remove your bumper to get access to the space in the fender area. You will also have to grind the hole next to the battery a little bigger so the pipe will fit through. Then thery is the matter of moving the battery so that it won't hit the intake.

Those are the basic steps. Let me know if you need anything cleared up. Hopefully the site will be up soon so you can take a look for yourself.

Good luck!
peace out..

[89accordlxi]

Oh yeah, don't forget the filter. I would recommend a K&N.

Peace..

[smufguy]

http://jdmfan.com/technical/performance/custom_intake

its copied to that site.

[THEBlakAcc]

thank you gentleman!!!
The info really is gonna help out with this project.
Look out for the Full project car whenits done.
I'm still not done yet...I'm only 1/4 of the way there!

PEACE OUT !!