PDA

View Full Version : new info on demon kits


tightwhitelx
09-20-2002, 01:48 PM
i called vis racing and got the part numbers and prices for the front and rear bumbers the front is 250.00 and the rear is the same the part numbers for the front are 88 HDPRE2DDEM-004 88H042DE01

AND FOR THE REAR

88HDPRE2DEX-002 88H042EX02

I didnt get the one for the side skirts because i am getting ones from another kit hope this helps
Mike's89AccordLX
09-20-2002, 02:04 PM
what do these look like?
Mike's89AccordLX
09-20-2002, 02:08 PM
are they ureathane bumpers?
theBeline
09-20-2002, 02:15 PM
GIVE UP THE LINK!!
toastyghost
09-20-2002, 02:24 PM
http://www.visracing.com/88preludedemon1.htm

$250/apiece = sweet price for those bumpers

If I had $500 I'd be getting those instead of GHETO ASS BOWSAW/EPOXY MAGICK
jteuton
09-20-2002, 03:53 PM
250 sounds a tad high to me and they are fiberglass
toastyghost
09-20-2002, 04:45 PM
You're a fucking moron.
toastyghost
09-20-2002, 04:48 PM
Oh wait I didnt see the location thing in your info until after I posted.. That would explain it.
jteuton
09-20-2002, 06:14 PM
i hope your not talking to me cause i was going to hook you up on a cheaper price that i got mine at but you can buy it for 250 instead. mine came in yesterday and it is fiberglass. I can also tell you what you have to do to make it work and show you digital pics of what it looks like on a 88 accord lxi. just instant message me at Slamd318dakota. (except toastyghost) I would post the prices and pics for all but then there are MORONS like this guy who doesn't deserve it.
bobafett
09-20-2002, 10:54 PM
hey can you send me the pics in email? how big are they? i would love to see that kit on a 3g! what msg app do you use? AIM or what?

if the pics arent TOO big, can you send them to me: [email protected]
jteuton
09-21-2002, 05:39 AM
they are about 100kilobytes. let me know if thats too big. Keep in mind that the is up on jack stands with the tranny out and I haven't got the kit painted yet when you recieve it ....its this off yellow color.
bobafett
09-21-2002, 08:53 AM
yeah thats small enough please send them... how many do you have? i prolly only have like 800k left in hotmail... but i would love to see these pics!!! i just wanna see the fit, and how the lines look on a 3g!
jteuton
09-21-2002, 08:54 AM
i'm sending them right now....i will send two of them....you will have mail in a few minutes
jteuton
09-21-2002, 08:59 AM
you should have mail.....lemme know what you think.....( i know its a mess....tranny swap)......and oh i accidently send pics of the flywheel by mistake.....disregard that
89lxi95zx7
09-21-2002, 09:24 AM
can i see those pics? i'm not a moron.
toastyghost
09-21-2002, 11:24 AM
Sorry, I was drunk as a motherfucker last night. I intended to put another one that said j/k or something but then I passed out. I'm not saying this just to be a bitch because I'm doing my custom shit anyway and I don't care if you hook me up or not. I just don't want everyone to think that I'm actually a hostile dick like that.
jteuton
09-21-2002, 12:09 PM
whats your email?
toastyghost
09-21-2002, 12:14 PM
Are you the same jteuton that was on the PlanetAOE board?
jteuton
09-21-2002, 02:28 PM
no i don't know what your talking about....the only forums i have ever been on is here and a dodge dakota cause i have a one of them too. The whole state thing just offened me cause i take pride in where i come from. I learn from experience just like you. I don't want to be childish so if there is a place on here I can post the demon pics than i will put them up on the board. I just don't like doing hard research and work on this and you calling me a moron. I would like to think that I went out on a limb by ordering this thing without knowing if it would fit or not and yes its almost an exact fit....and your 250 asking price is high.....grounddyamics has it for 200.....buy i'm from tn so why would i know anything???
JSmack
09-21-2002, 02:39 PM
can u send me a pic also to this email address plz [email protected] Thx alot
bobafett
09-21-2002, 07:58 PM
hey man i didnt get the pics... can you try sending them again...

[email protected]

i should have enough space for 2 pics... :)

i am very interested to see how well this kit flows, and how the corners match up on our cars vs the lude!

can you tell us if it looks like it was meant to be on our cars?
Chubs87Accord
09-21-2002, 10:37 PM
send em to me too... [email protected] i got a 15mb compacity so send away my friend, lol
toastyghost
09-22-2002, 12:54 AM
Ok well I'm very sorry that I made fun of where you come from. I don't have anything against Tennessee. Well ok nothing else besides the Titans.!! My sense of humor is just like that sometimes when I slam 40's! (gimme an amen) Anyway I am sorry, I don't actually mean to offend anyone, I am just sardonic as hell and you can't tell that because it is impossible to hear sarcasm in text! and I don't realize that b/c I'm drunk!! Sorry!

Oh yeah $250 is not my asking price! WTF?! I dont have an asking price b/c I'm not selling them!~@# That's just what someone said... and I thought that sounded good compared to the cost of other fiberglass kits of that style, but if you can get it for cheaper more power to ya. And post pics of your ride when you are done even if it is in a fagified toastyghost-protected thread or something!:lol

And btw, you are the better man for still saying who has the kit cheaper. I will however still be spending $37.99 per bumper + an assload of labor on my elite kit because I am po as shit. But that is beside the point.
toastyghost
09-22-2002, 12:54 AM
hmm
oh icehouse how i love/hate you...
tightwhitelx
09-22-2002, 02:10 AM
man i didnt know so many people had posted so quick but everyone should get the kit from www.grounddynamics.com its alot cheaper plus they have a kombat one too if you guys think the demon one is too ricey
whiteboy
09-22-2002, 12:04 PM
yo, if u email me the pics at [email protected], im a foundation memeber so i'll post em up here for you. Or hit me up on AIM and direct conenctmy name is: WhiteBoyInJersey
HondaManDan
09-22-2002, 02:58 PM
OK hey guys you DO know that that DEMON kit for the PRELUDE will NOT fit our ACCORDS it's been checked and checked again.. youre gonna need to do A LOT of work to get them to fit and even if you get them to they STILL will look funny. granted it looks nice on the lude it just wont work for our cars.
jteuton
09-22-2002, 07:41 PM
dude......i just made if fit......check out the pics.......its easy as cake
socal3rdgen
09-22-2002, 08:02 PM
dude...i want to seeeeeee pls send pics to [email protected]
whiteboy
09-22-2002, 08:09 PM
PICS ARE NOW UP IN A NEW THREAD, CHECK EM OUT

http://3geez.com/showthread.php?s=&threadid=6544


Jordan
Micah 89LXi
09-22-2002, 08:38 PM
send0r pics please [email protected] or throw em up on a website or something ..i wanna see this on a 3rd gen...oh and btw i have nothing against your state...but arkansas has CRAPTACULAR roads ^_^..i just had to say that