PDA

View Full Version : almost no power



lgoldtop
04-17-2008, 05:34 PM
i recentley replaceds the mainshaft bearing and the mainshaft seal on my 5 spd. now i recentley finished breaking in clutch but sometimes my idle hold around 2 in neautral but if i just touch my gas pedal the rpms goes up and then back down to where its supposed to be its like i dont have power because i just fly through the gears almost like my clutch is slipping . but my clutch isnt slipping i checked what could be wrong

ghettogeddy
04-17-2008, 05:36 PM
i dont get the prob
are you not getting any speed out of the gears or what

lgoldtop
04-17-2008, 05:48 PM
yeah i put my foot to the floor and i get a little power but my rpms fire up to 4,000 rpms really fast and im not slipping

ghettogeddy
04-17-2008, 06:10 PM
yeah i put my foot to the floor and i get a little power but my rpms fire up to 4,000 rpms really fast and im not slipping

hmmm i would think you slipping lol try adjusting the clutch cable it may need to be adjusted

russiankid
04-17-2008, 06:20 PM
Sounds to me the clutch cable is out of adjustment.

lgoldtop
04-19-2008, 11:40 AM
i adjusted the clutch cable correctley and i still have no power any other suggestions guys?

2oodoor
04-19-2008, 12:17 PM
i adjusted the clutch cable correctley and i still have no power any other suggestions guys?

how much free play do you have at the top of the clutch pedal

idle problems is likely a vacuum leak somewhere

check your axles as well, that kind of sounds like a stripped spline too