PDA

View Full Version : White Smoke Out Of Exhaust


TWOLOUDNPROUD
05-22-2008, 11:26 AM
We all know what what white smoke means out of the exhaust i should not have used that cheap ass Federal Mogul gaskey kit i should have used AJUSA gasket kit but whats done is done. i keep you guys updated.
TWOLOUDNPROUD
05-22-2008, 01:46 PM
http://www.3geez.com/forum/images/smilies/Flush.gif
forrest89sei
05-22-2008, 02:02 PM
That sucks!!
carotman
05-22-2008, 03:16 PM
yuck. My BG Automotive gasket held up fine so far. I had to retorque it after a couple of days tough. Painful thing to do but it was worth it in the end.
AccordB20A
05-22-2008, 05:34 PM
gay. i know how it feels.
MessyHonda
05-23-2008, 01:07 AM
you should of stucked with the a20
A18A
05-23-2008, 01:16 AM
i like how you never give up
2oodoor
05-23-2008, 03:46 AM
Stud the block if you are going to be merciless on the old girl.
Sorry it is broke already
forrest89sei
05-23-2008, 07:32 AM
gay. i know how it feels.

Indeed, We need a Video of a hot cheerleader Cheering Tommy on!
TWOLOUDNPROUD
05-23-2008, 09:50 AM
Stud the block if you are going to be merciless on the old girl.
Sorry it is broke already

I have APR head stud but i went cheap on the head gasket + kit now i am paying for it.
http://memimage.cardomain.com/member_images/11/web/359000-359999/359877_255_full.jpg
snoopyloopy
05-23-2008, 09:25 PM
you're not talking about stock cylinder pressures are you? it should hold up reasonably well stock, right?
TWOLOUDNPROUD
05-23-2008, 10:30 PM
you're not talking about stock cylinder pressures are you? it should hold up reasonably well stock, right?

i am running 10.5 psi of boost thats why i am useing APR head stud's.
TWOLOUDNPROUD
06-19-2008, 02:56 PM
Update

i got it apart and the head gasket was goodhttp://www.3geez.com/forum/images/smilies/dunno.gifi was like http://www.3geez.com/forum/images/smilies/wtf.gif so i took the head to the machine shop and had them check it out pressure tested and pull the head apart and check for cracks and nadahttp://www.3geez.com/forum/images/smilies/dunno.gifso i started to take a look at my ebay turbo and it was leaking on the hot sidehttp://www.3geez.com/forum/images/smilies/badpc.gif the bearing are shothttp://www.3geez.com/forum/images/smilies/rocketwhore.gif so i went out to PnP and got another garrett Center Bearing Housing off a T Bird and fixed my ebay turbo. All that shit and it was not the head gasket at least i got a valve job now time to start to put back together.
RobT5580
06-19-2008, 03:34 PM
You scared me because i have that head set and might use it unless i find a better alternative soon. It looks decent but not as high quality as the OEM honda ones looked so i was skeptical of using it.

Good luck this time around!
bobafett
06-19-2008, 03:35 PM
good to hear your motor is good. its a good time to use a better turbo. so what a PITA, but it sounds like the setup is going to be better now!
TWOLOUDNPROUD
06-19-2008, 04:45 PM
Here some pic's
Egay Center Bearing
http://i109.photobucket.com/albums/n80/TwoLoudNproud/DSCN7214.jpg
http://i109.photobucket.com/albums/n80/TwoLoudNproud/DSCN7215.jpg
http://i109.photobucket.com/albums/n80/TwoLoudNproud/DSCN7217.jpg
http://i109.photobucket.com/albums/n80/TwoLoudNproud/DSCN7218.jpg
garrett Center Bearing
http://i109.photobucket.com/albums/n80/TwoLoudNproud/DSCN7211.jpg
http://i109.photobucket.com/albums/n80/TwoLoudNproud/DSCN7213.jpg