new pix of b16 hatch

[ZackieDarko]

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2643.jpg
http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2642.jpg

here is the required VC shot
http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2640.jpg

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2620.jpg

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2621.jpg
http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2623.jpg

[ZackieDarko]

here ares some quick shots of the mounts


drivers side
http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2625.jpg
http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2626.jpg

pass side
http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2627.jpg
http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2628.jpg
http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2630.jpg

rear mount
http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2632.jpg
http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2631.jpg

[ZackieDarko]

some quick exhaust pix + video!

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/th_104_2678.jpg (http://s9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/?action=view&current=104_2678.flv)

MUFFLAR!
i know it is not mounted correctly i know it looks dumb like this but w/e i had a limitied ammount of time and supplies

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2676.jpg

mmmm 2.5"
http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2673.jpg
http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2674.jpg

[ZackieDarko]

this is why it was totaled....this little bit of damage here

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2670.jpg

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2671.jpg

here are some of the Hasport hydro-cable conversion kit
i am 99% sure the trans is from a hydro GSR

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2682.jpg

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2681.jpg

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2679.jpg


this one really shows how much room is left in our bay (latterly) after a b-swap

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2624.jpg

[GraniteLXI]

:redx::redx::redx: :)

[ZackieDarko]

some interior shots
be jealous of my cup holders and mad USDM leather SE-i arm rest
i actually have 2 sets up cup holders/center consol/arm rests

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2649.jpg

short shifta, feels real real nice

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2650.jpg

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2648.jpg

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2653.jpg


i can personaly vouch that these arm rests will hold over $30 in change (USD)

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2651.jpg

this little nifty guy makes my CEL light turn on and blink my CEL codes at me so i dont have to get under the seat

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2655.jpg

[Civic Accord Honda]

take pixors of how your radiator is teh mounted

[mykwikcoupe]

works for me and i likey.

[ZackieDarko]

here are some pix of the TypeR brake upgrade that Legend_master created...has anybody who has actually done this upgrade had this problem?

a small backing plate that sits between the actual pad and caliper came loose (on both sides of the car...but only the side faceing outwards) and dug into the hub of the rotor

also forgive the rustyness of things i never go around to painting anything

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2661.jpg
http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2664.jpg

if you look closely you can see the plate that has come loose and is currently sticking out of the caliper (i just removed the disloged plate on the passenger side)

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2666.jpg

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2667.jpg

the pads are the ones that came with the calipers when i bought them from NAPA.....so if you do do this upgrade don't use their pads!

[AccordB20A]

cool. wheres the thrash videos

[ZackieDarko]

i took the car to the track for the 1st time back in March or April and I didn't have an overflow bottle...this was my solution


my buddy and i ran down to the corner store bought this and chuged a few zip ties later VUWALA

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2641.jpg

and here are some shots of the VC ....trying to be all artistic and cool

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2686.jpg

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2687.jpg

i like this one the best

http://i9.photobucket.com/albums/a96/ZackieDarko/car%20stuff/6-18-08/104_2691.jpg

[ZackieDarko]

cool. wheres the thrash videos


as sad as it is the car is gonna be down most of the summer while i find a replacement shell

[Civic Accord Honda]

looks good :)

[russiankid]

Looking good, but it looks like your radius arm lock nut is not even tightened :ugh:.

[frantik]

sweet

[MessyHonda]

looking good the s80 is the b16 trans...

[knarg]

there's an impressive amount of rust on that car wow!

definitely get a new shell

[ZackieDarko]

looking good the s80 is the b16 trans...


the trans is from an integra

http://hondaswap.com/swap-articles/b-series-transmission-guide-29099/

[bullard123]

Nevermind the rust. Thats a nice B16 sawp!

[Civic Accord Honda]

there's an impressive amount of rust on that car wow!

definitely get a new shell
O_o rust ? i dont see any rust besides were the paint flaked off under the car
now this is rust
http://s110.photobucket.com/albums/n111/civicaccordhonda/rust-and-shit/ ( view pics behind bumper and qutar panel and that was in august its worse now :( )

[GraniteLXI]

Nice swap...rust? Man that thing is mint! Go further north if u wana see rust XD

[bullard123]

Rust= Weight reduction. FTW!

[MessyHonda]

does it still leak oil?

[ZackieDarko]

does it still leak oil?


it doesnt seem to be driping anywhere, there is some under the dist

the whole thing is geting pulled nextweekend so i will have pleanty of time to rebuild it

[guaynabo89]

Good work

Did you make the mounts yourself?

[ZackieDarko]

Good work

Did you make the mounts yourself?


negative

i bought the car from a member on here

RaceTek82

i also have possibly found a laurel blue hatch for $225 with a blown head gasket to replace the shell that i currently have

[HondaSi88]

Even though i hate b16's and think they are underpowered! I gotta respect the work put in....

find a another shell

[snoopyloopy]

not bad not bad. get it rebuilt into a new shell already!

[BITESIZE]

Thats my old muffler yay!! Do you like the sound of it?

[ZackieDarko]

Thats my old muffler yay!! Do you like the sound of it?


at idle its nice but as soon as i start geting into vtec territory it sounds kina :rice: i think a lot of the fiberglass is gone..causing that sound

i think im gonna order a vibrant muffler when i find a new shell

[malicious_maestro]

i hate this car...with a burning passion...lol /jk who i hate is the guy that did the swap.. it wouldnt be such a PITA if he had doen it using a method we like to call "the right way"
also.....why would you go through all the trouble of this swap for a B16? i think the stock a20 can almost keep up with it

[Bass Man]

I think the main reason is so he can upgrade to a JDM B16 ;)

Very sweet... I totally wish I had "The Vtec"!

[2ndGenGuy]

Next time I'm in Auburn, can I go for a ride? :D

[MessyHonda]

i hate this car...with a burning passion...lol /jk who i hate is the guy that did the swap.. it wouldnt be such a PITA if he had doen it using a method we like to call "the right way"
also.....why would you go through all the trouble of this swap for a B16? i think the stock a20 can almost keep up with it



trust me...the car sounds awesome cuz i met the last owner at a Dyno meet. i wanted to race it but zack never called me back...i wanted to see what my car could do against it.

[ZackieDarko]

trust me...the car sounds awesome cuz i met the last owner at a Dyno meet. i wanted to race it but zack never called me back...i wanted to see what my car could do against it.


lol sorry! i didnt get the message until i was out of oakland

next time?

[cubert]

why would you go through all the trouble of this swap for a B16? i think the stock a20 can almost keep up with it


:eek5:

[ZackieDarko]

Next time I'm in Auburn, can I go for a ride? :D

if it's driveable sure, i'll even let you get behind the wheel and let 'er rip

[2ndGenGuy]

if it's driveable sure, i'll even let you get behind the wheel and let 'er rip

It will be glorious!

[AccordB20A]

haha coolies.

it it was me with an accord money and b series mounts that b16 would be getting replaced with a b20b/z block and that b16 head would be going on it haha

[ZackieDarko]

haha coolies.

it it was me with an accord money and b series mounts that b16 would be getting replaced with a b20b/z block and that b16 head would be going on it haha


if anybody wants to doante or give me money and i give rides i found a B20Z2 short block ready for a VTEC head for $350

[MessyHonda]

lol sorry! i didnt get the message until i was out of oakland

next time?



my car is getting parted out yo...too late...

[2ndGenGuy]

if anybody wants to doante or give me money and i give rides i found a B20Z2 short block ready for a VTEC head for $350

Aren't all shortblocks ready for cylinder heads? Just by nature? :D

[ZackieDarko]

Aren't all shortblocks ready for cylinder heads? Just by nature? :D


thats what she said?

[racetek82]

i hate this car...with a burning passion...lol /jk who i hate is the guy that did the swap.. it wouldnt be such a PITA if he had doen it using a method we like to call "the right way"
also.....why would you go through all the trouble of this swap for a B16? i think the stock a20 can almost keep up with it

The right way? What do you feel is the right way? The swap was done in a professional manner, using all new parts. The mounts? New HASPORT poly inserts. These were fabbed in a prototype manner, which can attribute to them not looking pretty, but they work pretty damn well compared to some of the shit I've seen people do on these forums. I made this shit work without the use of a bolt in kit many of you cry for. Oh, and as to why a B16? For the best reason of all, it was free. I had a full motor, tranny, and ecu sitting at the shop, so why not a B16? Plus it was easier to BAR certify anyways. I had plans for a B20 bottom end, and having it BAR'd as a B16 meant I didn't have to worry about it in the future (B20 swaps are not BAR legal). So please, tell me what the "right way" of doing things are? Unless you're rollin' around with an equal accomplishment, please keep you're BS comments to yourself.