New Rear Upper Control Arms On

[mushroom_toy]

Well got the new rear upper and new balljoints on and I didnt even think about this, but are the arms/balljoints gonna affect my toe in the rear? Right now I should have -.98 camber in the rear, but if might affect my alignment in the rear Ill have to go get it aligned. I hope I shouldnt have to but wanted to know what yall thought.

[DBMaster]

There is normally no adjustment available for us without some of the various mods mentioned in the forums. I have even seen adjustable rear control arms online. They have a threaded rod and sleeve built into the arm - great idea!

The rear arms might affect camber, but that's about it. I just changed mine a few weeks ago and it looked like I went from slightly negative to slightly positive camber. They seem to have "settled" a bit, though. So, you don't need to get an alignment unless you're just due for one.

[russiankid]

They shouldn't affect the toe as the lower control arm and trailing arm will prevent the upper arm from doing that.

[mushroom_toy]

Good deal.

[2oodoor]

you mean these?
http://www.spcperformance.com/PROD_DIR/SPCPerf_PROD_SEARCH_DYN.cfm?cmd=Cam&cmd2=67395&cmd3=

[DBMaster]

Yup, just like those.

[nswst8]

you mean these?
http://www.spcperformance.com/PROD_DIR/SPCPerf_PROD_SEARCH_DYN.cfm?cmd=Cam&cmd2=67395&cmd3=


I just installed these on the accord while doing the rear disc swap upgrade. THEY ARE SWEET, A MUST HAVE IN MY OPINION.