PDA

View Full Version : coin tray inserts (upholstery)


lostforawhile
10-02-2008, 06:09 PM
Just made another couple of coin tray inserts for the top of the dash, I thought I would take some pictures through the project. this thread is in two posts.
The trays themselves are made from ABS automotive plastic about 1/8 of an inch. I had cloth inserts,but the cloth gets really dingy after a while. heres the pieces laid out on the material, I used blue tape to mark the areas that need glue.
http://i220.photobucket.com/albums/dd158/lostforawhile/S4020175-1.jpg
glue is applied to the material, it has to dry on the material and the part for about 15 minutes. you want it tacky so it sticks. I use delta glue,good stuff but really strong
http://i220.photobucket.com/albums/dd158/lostforawhile/S4020176-1.jpg
always mark what side to apply glue too,it's really easy to forget and cover the wrong side.
http://i220.photobucket.com/albums/dd158/lostforawhile/S4020177-1.jpg
glue applied
http://i220.photobucket.com/albums/dd158/lostforawhile/S4020178-1.jpg
parts applied to fabric
http://i220.photobucket.com/albums/dd158/lostforawhile/S4020179-1.jpg
rough cut around material
http://i220.photobucket.com/albums/dd158/lostforawhile/S4020180-1.jpg
material trimmed,notice the material is cut in a pinking pattern,this allows it to fold over the edges with bunching up, this takes practice to cut and stretch fabric
http://i220.photobucket.com/albums/dd158/lostforawhile/S4020181-1.jpg
http://i220.photobucket.com/albums/dd158/lostforawhile/S4020182-1.jpg
lostforawhile
10-02-2008, 06:13 PM
post 2
glue applied to back side
http://i220.photobucket.com/albums/dd158/lostforawhile/S4020183-1.jpg
finished parts
http://i220.photobucket.com/albums/dd158/lostforawhile/S4020184-1.jpg
http://i220.photobucket.com/albums/dd158/lostforawhile/S4020185-1.jpg
http://i220.photobucket.com/albums/dd158/lostforawhile/S4020186-1.jpg
markmdz89hatch
10-03-2008, 07:20 PM
looks good Tim. I'm just amazed it took someone else so long to make one of these again. i've had something similar in mine for some 8 years now, and got the idea from Paulie (one of the original members, and pioneers of the modded 3G).

While mine is similar, it's really interesting to see someone make a two-piece like you did there. Take some pics of it in the car, I really wanna see what this puppy looks like.
2ndGenGuy
10-03-2008, 10:07 PM
Maybe I haven't been around 3rd gens enough... but where exactly does that go?
2oodoor
10-04-2008, 03:31 AM
that is real neat work ...looks good....but I like my coin, parking pass, cup holder, sanwich making, spare screw and butt connector holding TRAY .. lol
so I will just enjoy your inserts in your car. Kinda like a faux air bag.
lostforawhile
10-04-2008, 05:30 AM
triple post lol, these just attach in the coin trays on the top of the dash,sorry for the confusion, I think there was some confusion with the pop out one. they looks a lot better then the scratched up beat up ones on the top of the dash, remember my dash will be black when i'm all done, so it's part of the dash. I still need to get another dash from the junkyard, to see if it can be disassembled in some way,if it can, I thought about covering the dash itself.
lostforawhile
10-04-2008, 10:39 PM
I wanted to bring up a point, if you try this stuff at home, spend the money to go buy some glue from an upholstery shop, the glue you buy at home depot or walmart,isn't designed for what an automotive interior goes through. it will eventually fail,and you'll have to do it again. and be careful,most pro glues are pretty potent and extremly flammable.
2ndGenGuy
10-04-2008, 11:31 PM
Need pics of this installed. I still don't understand where the "coin tray" is... :tongue:
lostforawhile
10-05-2008, 10:45 AM
they are the depressions in the top of the dash,under the clock. the notches are for the gauge cluster that replaces the factory clock area.
Pico
10-05-2008, 11:07 AM
They look good Lost, cant wait too see them installed
2ndGenGuy
10-05-2008, 11:12 AM
Oooh... I guess I never called them coin trays before haha. Cool stuff!
MessyHonda
10-07-2008, 09:44 PM
any pics of it installed yet?
lostforawhile
10-08-2008, 02:37 AM
any pics of it installed yet?if i get out there this weekend to work on this harness i will take a picture when i have them mocked up and in
rfiks
10-08-2008, 06:03 PM
cool
MessyHonda
10-12-2008, 10:29 PM
if i get out there this weekend to work on this harness i will take a picture when i have them mocked up and in

cool thanks for the update...il also need to take some pics of my car