PDA

View Full Version : 32/36 basic jetting



2old_honda
10-23-2008, 12:24 AM
Anyone know what size jets come in the weber 32/36 kit for our cars? I just got a 32/36 that is currently jetted for a 6cyl Jeep so I am obviously going to have to make some changes.

If I purchased a standard weber 4cyl jet kit would I have everything needed?
here is what is included in the kit:
Main(145,150,155 ) ,Idle (65,70,75 ) ,sec Idle (55,60) , Pump jet 55 and Air Corrector (160,170,180 )

I am wanting to tune for best MPG, maximum performance is not a concern.

2oodoor
10-23-2008, 03:21 AM
Anyone know what size jets come in the weber 32/36 kit for our cars? I just got a 32/36 that is currently jetted for a 6cyl Jeep so I am obviously going to have to make some changes.

If I purchased a standard weber 4cyl jet kit would I have everything needed?
here is what is included in the kit:
Main(145,150,155 ) ,Idle (65,70,75 ) ,sec Idle (55,60) , Pump jet 55 and Air Corrector (160,170,180 )

I am wanting to tune for best MPG, maximum performance is not a concern.

go ahead and see what you have in it for the jeep, from what I have been reading on off road forums there are not a lot of differences except for the air corrector jets. You may be close already. You can work with that jet kit though, those standard sized are listed here somewhere.. but I think they come with 50 idlle, something like 140/160 then sec 145-165 and pump 50.
F50 /F6 emut tube.
Someone needs to confirm this though because every one I have had was not originally jetted for the honda 2.0. / There is a sticky
http://www.3geez.com/forum/showthread.php?t=4223