Integra Front Lip sits too high?

[jdmaccordnut]

I've seen others who have the lip, and it doesn't cover their vent holes. Mines covers up the bottom edge of my front vents... how did you mount it lower?

[codyJDM]

You either use spacers between the lip and the bottom of the bumper(which I didnt)

Or you can use long bolts and make sure it is tight and adjust the bolts to adjust to lips height.

There is about an inch gap between the mounting points of my lip and my bumper and the bolts being long and taught are all that keeps it there and it hasn't moved a bit.

*edit idk if that makes sense let me go take a picture for you.

[codyJDM]

I hope this helps

http://i22.photobucket.com/albums/b307/badubagabi/DSCN0879.jpg

The tension of how the lip fits holds it in place, it is really hard to move it you have to really push on it.

http://i22.photobucket.com/albums/b307/badubagabi/DSCN0882.jpg

And that is where it sits, ignore my chipped and royally F***'ed paint gonna fix that soon haha.

[snoopyloopy]

yeah, you use spacers. maybe one day i'll get off my ass and install mine and take pix and make another how-to.

[codyJDM]

yeah, you use spacers. maybe one day i'll get off my ass and install mine and take pix and make another how-to.

I don't have spacers, I just adjusted the bolts to the proper level I wanted the lip at and it hasn't budged.

[MessyHonda]

i used one inch spacers on mine....worked fine

[RamThis]

Spacers. I bought mine off sk8r if I remember right (been a while...) but he has spacers for it to make it set in the right position and allow the bolts to clamp it down tight against a solid surface.

[labeledsk8r]

Spacers. I bought mine off sk8r if I remember right (been a while...) but he has spacers for it to make it set in the right position and allow the bolts to clamp it down tight against a solid surface.

yeah it was me :wave: and yes there nylon spacers, you can pic them up ad any hardware store, along with bolts and nuts. the sizes were a 1 1/4th inch long bolt and a 1/2 inch spacer.... if i remember right the 1 1/4th was kinda tight so you might wana try 1 1/2... also i dont remember how many bolts were used... i wana say 10.. but cant remmber.. mayby ram this will chime in

[frantik]

1 in spacers make it look perfect imo

[labeledsk8r]

now you guys got me wondering if they were 1 inch spacers... i really dont remeber.. its been so long since i messed with the lip :(

[MessyHonda]

i need to redo my lip...my car is low it hits most driveways.


here is a pic freshly installed at the picoshop

http://img.photobucket.com/albums/v650/Messybone/LX-i/DSCF2687Medium.jpg

[Low_Rida]

Haha you call that low? you shoulda seen my old golf... i was only 1 inch off solid ground, and i did a rally in hallifax with it, Gah I loved my VR6 but it was a pig on gas, worse than a truck.