View Full Version : Strut Bar
DEEGO
10-30-2008, 10:43 AM
Hi, I have been doing some searching and I've found that LX-I's and some carb'd 3G's have front/rear strut bars. I was wondering if anyone had an idea where i could get one for my 87DX. I believe some are custom? If so perhaps how it was made or aquired? Thank you in advance!
ghettogeddy
10-30-2008, 11:16 AM
there nt made for our cars anymore besdies custom
your going to swap you filter housing out for a certin civic one to be able to put on up front
that would be your first goal
DEEGO
10-30-2008, 12:03 PM
there nt made for our cars anymore besdies custom
your going to swap you filter housing out for a certin civic one to be able to put on up front
that would be your first goal
***
Thanks for the advise, Any suggestions for the rear?
ghettogeddy
10-30-2008, 12:08 PM
this is the front and rear upper strut bar and the rear lower tie rod
http://www.3geez.com/forum/sr_classifieds.php?do=ad&id=109
DEEGO
10-30-2008, 12:18 PM
this is the front and rear upper strut bar and the rear lower tie rod
http://www.3geez.com/forum/sr_classifieds.php?do=ad&id=109
*****
Awesome! Thanks!
Prime 61
11-02-2008, 07:10 PM
On an 89 carbd dx what has to be done to the filter box to install the strut tower up front any pics thanx in advance
ghettogeddy
11-02-2008, 07:22 PM
On an 89 carbd dx what has to be done to the filter box to install the strut tower up front any pics thanx in advance
umm i tried to find the link there is one on here some were that shows you how to do it
but like i said i could not find it so your gona have to search till you cant search no more
DEEGO
11-03-2008, 09:44 AM
umm i tried to find the link there is one on here some were that shows you how to do it
but like i said i could not find it so your gona have to search till you cant search no more
*****
Anyone know of another source to get strut bars? I tried the link provided but got no response. Anyone know of any others?
ghettogeddy
11-03-2008, 10:09 AM
send him a pm other then that you can try to find a dc strut bar but there no longer made
and are few that people will sell lol
everyone else is custom
Prime 61
11-03-2008, 05:39 PM
sorry a little computer retared but i absolutly cant find any threads on installing a front strut tower bar on a carbed car but i keep seeing stuff bout civic air boxes but no threads that explain anything
AZmike
11-03-2008, 07:13 PM
What do you hope to achieve by adding a front shock tower bar?
Prime 61
11-03-2008, 07:42 PM
just to tighten everything up a little more
MessyHonda
11-08-2008, 11:37 AM
just to tighten everything up a little more
tight is good
89sei89dx
11-08-2008, 11:45 AM
if u cant find onethat fits they are hella easy to make if u can get hold of a welder. it took me about an hour to make my rear upper bar. thats all ive had time to make yet . it started on the front of my car and fit good and theni modded it to fit in the back on the strut mounts .also u can customize some of the civic bars to fit but u stillneed access to a welder.i think i seen some on the tradin post still the othher day.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.