parts from cars in junkyard?

[jamesh23]

I visited the junkyard today and they had a few cars that caught my eye, they had a early 90's or late 80's honda accord 2.0 something, 4 door, a honda prelude, about the same year, and a honda civic that was bit newer, anything I could take from these cars to make mine better or faster or anything? i have a 1988 honda accord lxi 5 spd, all of the were 5 spds too I think except the honda accord.

[cygnus x-1]

Not really. Your Accord has the highest rated HP for the A series engines that exist in the US.

C|

[Demon1024]

if you can find any brand name aftermarket part's grab those. headers/exhaust, sus, rear disk brakes. idk... a set of alum alloy rims?

[jamesh23]

they actually had a few sets of nice rims but they were 5 lug or thrashed, so not even like the seats or anything are worth it? how do you tell if the headers or something are aftermarket?

[Demon1024]

they will be tubular not cast iron.
seats 3'rd gen lude work after changing the rails

[rfiks]

heres my j.y. list:

-4th gen. accord map sensor
-90-97 accord rear control arm
-89 integra gears, final gears and axles(CG tranny)
-Vigor rear sway bar

*oh yea and maybe buy a "DELTA" 272 regrind.(not a j.y. part,:dunno: maybe if u get lucky!)

[Tdurr]

^^ 4th gen map sensor doesnt do anything.... dyno proven.
if u like the shift knobs better yank those they will fit. lol

[cygnus x-1]

^^ 4th gen map sensor doesnt do anything.... dyno proven.
if u like the shift knobs better yank those they will fit. lol

I've always been suspicious of the 4g MAP sensor mod. Was there a thread with the dyno results somewhere?

C|

[jamesh23]

they will be tubular not cast iron.
seats 3'rd gen lude work after changing the rails

sorry but whats tubular? how do you change rails? could I use the ones from my stock seats?


heres my j.y. list:

-4th gen. accord map sensor
-90-97 accord rear control arm
-89 integra gears, final gears and axles(CG tranny)
-Vigor rear sway bar

*oh yea and maybe buy a "DELTA" 272 regrind.(not a j.y. part,:dunno: maybe if u get lucky!)

what do all of those do and whats their purpose? whats a delta 272 regrind and whats its purpose? on what kinda car would I find it?

edit, a delta 272 is an aftermarket cam shaft correct? what benefits does it produce?

[Demon1024]

tubular=awesome lol:)
it'll look similar to chain link fencing poles bent into a header. here's one on ebay
here (http://cgi.ebay.com/ebaymotors/New-Pace-Setter-Header-1986-89-Honda-Accord-2-0L_W0QQcmdZViewItemQQ_trksidZp3286Q2em20Q2el1116QQ itemZ120269005699QQptZMotorsQ5fCarQ5fTruckQ5fParts Q5fAccessories)
and here (http://cgi.ebay.com/ebaymotors/PACESETTER-HEADER-honda-ACCORD-86-89-88-87-1986-1989_W0QQcmdZViewItemQQ_trksidZp3286Q2em20Q2el1116 QQitemZ270319128923QQptZMotorsQ5fCarQ5fTruckQ5fPar tsQ5fAccessories)
and yeah use the rails from your car. the thing the seat connected to and slides on

[MessyHonda]

I've always been suspicious of the 4g MAP sensor mod. Was there a thread with the dyno results somewhere?

C|

i dynoed the 4th gen mapsensor but this is when i was obd0......it gained me 2whp and 4 foot pounds of torque....but my mpg dropped to 23mpg

[jamesh23]

tubular=awesome lol:)
it'll look similar to chain link fencing poles bent into a header. here's one on ebay
here (http://cgi.ebay.com/ebaymotors/New-Pace-Setter-Header-1986-89-Honda-Accord-2-0L_W0QQcmdZViewItemQQ_trksidZp3286Q2em20Q2el1116QQ itemZ120269005699QQptZMotorsQ5fCarQ5fTruckQ5fParts Q5fAccessories)
and here (http://cgi.ebay.com/ebaymotors/PACESETTER-HEADER-honda-ACCORD-86-89-88-87-1986-1989_W0QQcmdZViewItemQQ_trksidZp3286Q2em20Q2el1116 QQitemZ270319128923QQptZMotorsQ5fCarQ5fTruckQ5fPar tsQ5fAccessories)
and yeah use the rails from your car. the thing the seat connected to and slides on

ok thanks, and how do you check what camshaft they have and how could I identify a delta 272?

[Tdurr]

i dynoed the 4th gen mapsensor but this is when i was obd0......it gained me 2whp and 4 foot pounds of torque....but my mpg dropped to 23mpg

Well u kno mushroom toy? he swapped out a 4g, and a 5g(i think) all in session, all the other ones did was make it run rich in the top end.

[OldSkoolA20accord]

dont the lxi's have rear disks?

[OldSkoolA20accord]

edit, a delta 272 is an aftermarket cam shaft correct? what benefits does it produce?


its a cam regrind. More power&torque.

[Tdurr]

dont the lxi's have rear disks?

Yes. They should.

[Demon1024]

^^
^
what?
sei's do.... lxi no or i'd be quite happy :)

i'd be curious to know how to look for/where to identify an aftermarket cam too

[OldSkoolA20accord]

my friend has an lxi hatch and he went to check the back brakes and it had dicks. i believe it was an 89.

and if it has a regrind the size should be engraved in the cam buy the gear

[stevearino80]

can the front end of a prelude si same gen fit accord 3rd gen? cuz i found a prelude si that has a suicide hood, opens away from winshield rather than towards it :o)

[rfiks]

my friend has an lxi hatch and he went to check the back brakes and it had dicks. :wtf::lol::rofl::lol::rofl::lol::bowrofl:

[stat1K]

yeah first of all it had dicks??? that's frightening, second of all no hatch's came with disks in the us period, i don't think anywhere else either. they only accord with disks was the sei in the states. i have seen 3 sei's period so if your friend's hatch has them he's pretty lucky.

[stevearino80]

can the front end of a prelude si same gen fit accord 3rd gen? cuz i found a prelude si that has a suicide hood, opens away from winshield rather than towards it :o)

anybody?

[stat1K]

no, stop thread jacking.

[forrest89sei]

weather it has Rear Calipers or Rear Dick Brakes It all about Fluid dynamics :rolleyes:

But yeah he's very lucky to have SE-i Rears on his hatch :D

[stevearino80]

no, stop thread jacking.

dude read the title of the thread, it falls into the category (at junkyard) and im oh so sorry, forgive me?

[knifemind]

can the front end of a prelude si same gen fit accord 3rd gen? cuz i found a prelude si that has a suicide hood, opens away from winshield rather than towards it :o)

Yeah, they're called 2nd gen Preludes (87-87), and no.

[OldSkoolA20accord]

weather it has Rear Calipers or Rear Dick Brakes It all about Fluid dynamics :rolleyes:

But yeah he's very lucky to have SE-i Rears on his hatch :D

someone has their mind in the gutter. its disk not dick. homo. HAHAHA jk

[stat1K]

dude read the title of the thread, it falls into the category (at junkyard) and im oh so sorry, forgive me?

nope, you're still retarded for asking the question and for doing it in a thread that wasn't yours.