View Full Version : Window Crank HELP
JBona
01-14-2009, 05:52 PM
alright, ive been searching through here and have KIND of found what i need, but not entirely.
my window must have slipped off the track, ill find out when i get the panel off, but thats the problem
i have the entire panel ready to come off, but i cant get the crank handle off. i know there is a pin holding it on, ive taken cranks off of other cars, but my question is this: is the pin between the plastic and cardboard, or behind one of them?
i cant see the pin between the two, and i need to get this panel off ASAP (like tonight)
PLEASE HELP (pictures are more than welcome)
yeah its between them, it's a spring clip & if you have something like a fat flat head screw driver you can press the clip out and the crank should just slide off then. if that made no sense i can take a pic for you
JBona
01-14-2009, 06:05 PM
yeah, a pic would help alot. im gonna go dick around with it for a minute, but ill check back shortly. the stock foam around it is getting in my way as well, so its hard to see everything out in the open without the crap all around it
http://images.trademe.co.nz/photoserver/74/84481374_full.jpg
thats the sorta clip it is if that helps
JBona
01-14-2009, 06:59 PM
yeah i got it, fixed the window, and now my door is back together. thanks
DBMaster
01-14-2009, 11:40 PM
I am not advocating that you buy it here, but I have one of these and it makes removing manual window handles so easy you will kick yourself for not buying one sooner.
http://toolmonger.com/2007/02/07/finds-door-handle-window-crank-clip-tool/
MessyHonda
01-15-2009, 11:13 PM
any small flathead will do after you know how to take it out...i did it to my dx when i had to paint the door panels
Hauntd ca3
01-15-2009, 11:45 PM
I am not advocating that you buy it here, but I have one of these and it makes removing manual window handles so easy you will kick yourself for not buying one sooner.
http://toolmonger.com/2007/02/07/finds-door-handle-window-crank-clip-tool/
hell yeah mate
if you got wind ups you gotta have one of those things
they make life easy as bill gates
evil88accordLX
01-16-2009, 11:41 AM
ive always just slid a rag in there and moved it back and forth until the pin pops out. takes like 10 seconds.
Dr_Snooz
01-16-2009, 11:22 PM
they make life easy as bill gates
Didn't know Bill swung that way...
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.