rear caliper rebuild

[Hauntd ca3]

hey guys
i'm rebuilding my rear calipers right.
now the manual shows that the handbrake cam that actuates the handbrake just lifts out.
but mine wont
i mean its nice and free now after much shagging around but wont lift out.
i want to put all new seals in it and grease it all up so its good for ages.
anyone else done one of these before?

[MessyHonda]

i didnt bother rebuilding.....legend master has a good writeup on how to upgrade to 1st gen legend rear calipers....piston is bigger for a better contact area

[LX-incredible]

You need to remove the rod the cam actuates (#10) to get the cam out. Unfortunately everything else needs to come out as well...

There is a thread on here somewhere that goes over everything.

http://www.thehondapartsstore.com/herson/jsp/catimgs/13sg70_b2001.gif