PDA

View Full Version : February Accord of the Month - LX-incredible



87accordlxi
02-05-2009, 07:52 AM
Congratulations to LX-incredible for becoming our Accord of the Month for February!


LX-incredible

Engine

• A20A3, semi-rebuilt.

• Toga HP oil pump.

• EGR and cold idle block-off plates.

• Small coolant line deletion and vacuum line simplification.

• New Accel injectors and new sensors.

• Engine harness wired and waiting for obd1.

• AEM Integra CAI with Dryflow filter.

• NGK V-power plugs.

Transmission and Drivetrain

• 5 speed rebuilt, with 1st gen Integra internals and Accord 5th.

• LUK Repset clutch (slightly stiffer than OEM).

• Skunk 2 88-00 Civic short shifter with aluminum shift knob.

• Prothane 84-87 Civic shifter bushings.

• New axles, wheel bearings, and hubs.

Exhaust

• DC Sports header.

• 2.5” Areo Turbine resonator.

• 2.5” Magnaflow spun metallic catalytic converter

• 2.5” Magnaflow performance muffler.

• 2.5” stainless mandrel bent exhaust, collector back, painted with VHT ceramic black paint.

Suspension

• Rebuilt 2g Accord manual rack and full power steering removal.

• All polyurethane bushings in front except UCA bushings.

• All poly bushings in rear except upper shock and trailing arm bushings

• All new ball joints, control arms, and remaining OEM bushings.

• Front and rear ST sway bars.

• Eibach Sportline 1.5” lowering springs.

• Bilstein HD shocks.

• Moog front camber studs.

• Ingalls Smart Arm rear camber adjuster with poly bushings.

• DC Sports front strut tower bar.


Brakes

• Rebuilt front calipers

• SE-i rear disc swap, all rebuilt or new parts.

• Front and rear Brembo Sport drilled rotors.

• AEM brake pads.

• Techna-Fit SS brake lines.

• New master cylinder.


Wheels and Tires

• Civic HX 14” lightweight wheels.

• Michelin Destiny P185/70R14.

Weight Reduction

• AC, PS, cruise control, and power antenna removal.

• Odyssey drycell battery with custom bracket.

• Trunk lining and center console removal.

http://img167.imageshack.us/img167/3541/p1000525hv2.jpg
http://img167.imageshack.us/img167/1901/p1000528ie4.jpg
http://img168.imageshack.us/img168/4894/p1000535ya9.jpg
http://img168.imageshack.us/img168/2927/p1000536yh7.jpg
http://img168.imageshack.us/img168/1120/p1000537yh4.jpg
http://img374.imageshack.us/img374/9905/p1000492gl5.jpg
http://img360.imageshack.us/img360/8350/p1000496oe3.jpg
http://img352.imageshack.us/img352/1528/p1000500ve9.jpg
http://img205.imageshack.us/img205/8145/p1000524jb2.jpg

87roach
02-05-2009, 08:10 AM
Congrats man! That thing is sooo clean. You need a real photo shoot though!

Pico
02-05-2009, 07:18 PM
Congrats on the win..
Your coupe is so clean

GTRSkyline43
02-05-2009, 08:55 PM
too sexy

LxAcc510
02-06-2009, 01:31 AM
So fucking clean. Such rare parts. Oh my oh my.

3gmodifier
02-06-2009, 02:42 AM
right on man!!!!!!!! i love seeing the coupes get some some love. clean ride dude!

bullard123
02-06-2009, 05:48 AM
Man i missed the voting this month lol.......Clean ride! Well deserved

LX-incredible
02-06-2009, 08:54 PM
Thanks.

Rendon LX-i
02-06-2009, 11:20 PM
love the suspension man....good job...very very clean...dealership syle lol.

MessyHonda
02-08-2009, 03:15 AM
nice car

Toneloc5145
02-10-2009, 06:04 AM
How did i miss voting?!? Anyways, i love what youve done with your car. You have a good balance of all aspects of the car. Congrats!

LX-incredible
02-11-2009, 01:21 PM
I believe there was only one nomination... Thanks.

fogged
02-11-2009, 06:45 PM
Congrates on the win. Coupes are just to sexy and yours proves it.

MessyHonda
02-12-2009, 07:23 PM
where did you find the rear bushings...i still need to rebuild my rear suspension...congrats on the clean coupe....are you going to swap it?

AccordB20A
02-13-2009, 10:41 PM
man i missed the voting also, havent ever seen your car before, i must say it does look incredible, also nice to know a 2g accord rack fits the 3g, did you have to swap the subframe to make that fit?

LX-incredible
02-14-2009, 11:37 AM
where did you find the rear bushings...i still need to rebuild my rear suspension...congrats on the clean coupe....are you going to swap it?

Thanks.

88-00 Civic rear shock bushings, 2 sets of civic rear uca bushings (8-307) with the inner sleeves from the 90-97 Accord (8-312) for the LCAs. The ST bar and camber kit came with poly.

Possibly... Everything's solid right now, but a crvtec is going in one of my cars even if I have to buy another. I am still wanting to do something with an A motor just because. Well see what comes first.

LX-incredible
02-14-2009, 11:43 AM
man i missed the voting also, havent ever seen your car before, i must say it does look incredible, also nice to know a 2g accord rack fits the 3g, did you have to swap the subframe to make that fit?

Thanks.

The rack fits with the 3g brackets cut out and the 2g brackets welded in the 3g subframe. The tie rods/tie rod ends need to be extended 1" on each side. Steering effort isn't bad at all, one of the best mods I've done to the car.

-$MOKIN-
02-14-2009, 02:40 PM
Omg

AccordB20A
02-14-2009, 03:18 PM
Thanks.

The rack fits with the 3g brackets cut out and the 2g brackets welded in the 3g subframe. The tie rods/tie rod ends need to be extended 1" on each side. Steering effort isn't bad at all, one of the best mods I've done to the car.


sweet at least i know ti can be done, Im on the lookout for a 3g accord manual rack so i can ditch the PS and get more power from my engine

Blackbird_
02-14-2009, 05:11 PM
Congrats man, that coupe is clean! Just wondering how much have you spent to date on your car?

LX-incredible
02-14-2009, 10:06 PM
sweet at least i know ti can be done, Im on the lookout for a 3g accord manual rack so i can ditch the PS and get more power from my engine

From what I hear the rack is the same as the 2g. Be sure to grab the crossmember as well, or you'll still need to cut and weld the PS one.
If you have the ability, could you find out what's different
with the tie rods/ends on the 3g manual? Part numbers?
I see no problem with the average guy modifying the crossmember, but it takes a bit more skill to elongate the tie rod ends. I'm confident in my work, it would be nice to have a bolt on replacement though...
That engine bay gets so much more delicious once that crap is removed, easier to work on too.

LX-incredible
02-14-2009, 10:07 PM
Congrats man, that coupe is clean! Just wondering how much have you spent to date on your car?

A lot.

AccordB20A
02-15-2009, 02:18 PM
From what I hear the rack is the same as the 2g. Be sure to grab the crossmember as well, or you'll still need to cut and weld the PS one.
If you have the ability, could you find out what's different
with the tie rods/ends on the 3g manual? Part numbers?
I see no problem with the average guy modifying the crossmember, but it takes a bit more skill to elongate the tie rod ends. I'm confident in my work, it would be nice to have a bolt on replacement though...
That engine bay gets so much more delicious once that crap is removed, easier to work on too.

instead of extending the tie rod ends did you try using a 3g accord "rack end" on the 2g accord rack, I suppose you know what im talking about, i wonder if they are shorter on the 2g....

Dr_Snooz
02-15-2009, 05:57 PM
Very, very nice. Yay for the coupes!!!

Civic Accord Honda
02-23-2009, 02:14 PM
Congrats man! a win well deserved

LX-incredible
02-23-2009, 02:17 PM
instead of extending the tie rod ends did you try using a 3g accord "rack end" on the 2g accord rack, I suppose you know what im talking about, i wonder if they are shorter on the 2g....

Same length.

LX-incredible
02-23-2009, 02:18 PM
Very, very nice. Yay for the coupes!!!


Congrats man! a win well deserved

Thanks.

knarg
02-25-2009, 02:56 PM
grats!! really nice car. love the suspension setup.

A18A
02-26-2009, 02:04 AM
yeah very clean car indeed, congrats :D

AccordB20A
02-26-2009, 11:49 AM
that engines my inspiration, i want mine that clean!

LX-incredible
02-26-2009, 09:57 PM
Thanks guys.

stat1K
02-27-2009, 08:48 AM
it was fun cleaning that intake manifold lol.

LX-incredible
02-27-2009, 11:11 AM
Yes yes, stat1k was instrumental in the cleaning of the intake manifold and TB. lol.

86ccord
02-28-2009, 07:04 PM
haha.. that is one clean car bro!! sick ride!! wish i could see it in person