PDA

View Full Version : Need a little 5-Speed SWAP INFO



A20A1
09-27-2002, 03:06 PM
What can I use from the A18A1 Dual Carb engine from the LUDE?
and what about it's shifter and cables and pedal brackets...

I'm pretty sure it's been asked before... I may have to buy a new A20 for around 200-300 at the same time. but then I may just go to an auction cause I've seen a 5-speed LX or DX coupe for about 600 lowest offer. not sure if it runs though.

K thanks guys. :wave:

A20A1
09-27-2002, 03:09 PM
Just to let you know I sat in the ludes moldy seats for about 5 mins just messing around with the clutch pedal and shifter.... urrrrrrrrr, chnk! urrrrrrrrrrrrrrrr, chnk chnk urrrrrrrrrrrrrrrrrrrrrrrrr!

sorry bad sound effects. :D

‹^› ‹(•¿•)› ‹^›
09-27-2002, 03:11 PM
So u are finally gonna go to manual speed dude? Gewd Luck~!

A20A1
09-27-2002, 06:50 PM
Yes and no... It all depends on my luck and the $$$

88LXi68
09-27-2002, 06:58 PM
You cant use the pedals or the shift rods from the prelude. I swapped to 5spd using a Lude Si tranny and I literally got EVERYTHING from it, but I couldnt use the pedals or the shift rods.

A20A1
09-27-2002, 07:04 PM
shoot, but it's like not the si I think... i dunno what it is, the hood flips forward... it's an old lude... but then the tranny works? or no?

88LXi68
09-27-2002, 07:08 PM
I used the 2nd Gen lude tranny. It bolted straight up! If you use the Lude DX tranny you will need the flywheel and axles because they are different than the Accord and Lude Si stuff.

A20A1
09-27-2002, 07:18 PM
OK so
I can use the tranny but the flywheel and the axles won't work... so i need the accord flywheel and axles right?

I'm sorry, I know how it's sometimes frustrating answering the same posts over and over can be. :D

flamed89
09-27-2002, 07:29 PM
my 86 si has an a20a3 in so the trans should be the same dont know about the 1.8 models though

88LXi68
09-27-2002, 07:32 PM
No no...
If you use the Carbed prelude stuff you will need the flywheel and axles from the carbed prelude. If you use the fuel injected prelude tranny you can use an Accord flyhweel or a prelude fuel injected one. You can also the accord axles (5spd)

A20A1
09-27-2002, 08:11 PM
oh so take the whole lot

thanks

PhydeauX
09-28-2002, 01:12 AM
Ok, if its an a18a lude then you're going to need to swap the diff with an accord diff. No way around it, your axles wont match the splines on that diff. Hold out for an Si unless you want to do alot of work. You'll need the accord linkages and pedals, neither the Si or DX lude will work, both have the same linkages and pedals btw.

andy

A20A1
09-28-2002, 01:48 AM
hmm guess I'l be waiting for the si then...

I'm gonna pull the dual carbs and manifold... maybe it will hold some goodies.

jteuton
09-28-2002, 07:26 AM
get you a 8 lb aluminum racing flywheel........hehehe

smufguy
09-28-2002, 09:58 PM
i thoguht u have a webber mike, why a stock dual carb??