1/4 mile

[Tommy AC89 Thailand]

Best record for 1/4 mile my car ran in 15.31 Sec. at Bangkok Drag Avenue Thailand with H22A engine in CA5 last year.
http://photos2.hi5.com/0035/675/877/SIiI5H675877-02.jpg
http://photos1.hi5.com/0033/891/084/fgbHoB891084-02.jpg
http://photos4.hi5.com/0034/273/119/rQ4fZl273119-02.jpg
http://photos1.hi5.com/0035/512/628/1FtmGf512628-02.jpghttp://photos1.hi5.com/0033/434/132/7QV5kS434132-02.jpg

[86AccordLxi]

Not too bad...

Do you have the lsd tranny or is that open diff?

[SILENT]

Nice... Awesome looking car... Mad Props...!!! how good are the R racing shocks??? hook us up!!!

[Tommy AC89 Thailand]

Nice... Awesome looking car... Mad Props...!!! how good are the R racing shocks??? hook us up!!!

R-racing is Hard...and...Jump...! But, I like its.

http://photos2.hi5.com/0058/128/461/lW1W41128461-02.jpg
http://photos4.hi5.com/0056/273/223/ixV9CN273223-02.jpg

[SILENT]

would you be able to send some to the US and if so how much for the set???

[Tommy AC89 Thailand]

Not too bad...

Do you have the lsd tranny or is that open diff?

No! I don't have LSD.

[Tommy AC89 Thailand]

would you be able to send some to the US and if so how much for the set???

It's difficult to find shock absorber like this inThailand.
Last time I use KONI Orange colour not good it's soft.
I couldn't drive my car is verylow just, 1 cm. from the ground...!
when I swap H22A in to my car.

[SILENT]

ok... well thank you for the info... again awesome looking 3gee... The H22 is simply amazing!!!

[88LXi68]

Good improvement over stock, but seems kind of slow to me. Is it tuned? Is the track above sea level? do you know how much it weighs?

[-$MOKIN-]

yeah sorta slow soundin to me too. looks like your got a gauge for everything in it. Wow. . .you need to loose all that weight you got in it.. And boy i wouldnt drive that at the track around here only runnin high 15's with the bright green paint i probably would get jumped at the track.. lol maybe take the body kit off primer it black then get rid of all the stickers on it take out all the interior even the door panels everything but the dash and the drivers seat. take the old gas tank out and put in a allluminum one in the trunk then drop it a inch in the rear and a 1 and a qyurter in the front. and run 15 inch rims with tires on it with low tire pressure. looks fun thought but just wouldnt run that car here in america. You might get shot in detriot if ya did.. lol
There has to be something wrong with a h22 in a 3gee to only run a 15. Thats sorta depressing to see that.I was thinkin the h22 to at least run a 13 in a 3rd gen. Even with slight mods to it .

[AccordB20A]

you should weight reduct your car and try again:)

[3rd Party]

There has to be something wrong with a h22 in a 3gee to only run a 15. Thats sorta depressing to see that.I was thinkin the h22 to at least run a 13 in a 3rd gen. Even with slight mods to it .

well duder, a Turbo II RX-7 making around 180-190 whp only runs low 15's, high 14's stock. so for an H22 to be running mid/low 15's isn't all that bad, considering our cars with the A20 probably run like 18's in the quarter, HAHA

[2ndGenGuy]

Stock Preludes with H22As in them seem to be running low 14's. I doubt there's a weight problem here. Seriously think that a few gauges is going to take a full second off the 1/4 mile time?

[-$MOKIN-]

Yea actually it could when you have a gauge for every sensor on your car .That can weight you down including having a extra 100 to 150 lbs for your interrior in it. It does effect your time. And running low profile tires is not good when your tryin to take off at high rpm's .If your goin to tac out your dash with ten tacs on it then you would think you would be set up to run 13 or 14's but to me running a 15 with a h22 in a quarter mile is not that good in my book. I think there was a 3gen a20 that ran low 16's on here awhile back he had a video. it was hilliarious to watch.

[thegreatdane]

Stock EDM BB6 H22A preludes run low-high 15's so doesnt look that bad to me.

[-$MOKIN-]

Wow .. I just thought they would run so much faster.

[86AccordLxi]

Gauges don't weigh 100-150lbs...

[AccordB20A]

still 15.3 will still shit on a lot of cars including mine

[Tommy AC89 Thailand]

Good improvement over stock, but seems kind of slow to me. Is it tuned? Is the track above sea level? do you know how much it weighs?

I don't tuned up with my engine yet.
Just standard ECU.
And standrd in side H22A
I don't know how many kilo of my car too.

[cubert]

yeah sorta slow soundin to me too. looks like your got a gauge for everything in it. Wow. . .you need to loose all that weight you got in it.. And boy i wouldnt drive that at the track around here only runnin high 15's with the bright green paint i probably would get jumped at the track.. lol maybe take the body kit off primer it black then get rid of all the stickers on it take out all the interior even the door panels everything but the dash and the drivers seat. take the old gas tank out and put in a allluminum one in the trunk then drop it a inch in the rear and a 1 and a qyurter in the front. and run 15 inch rims with tires on it with low tire pressure. looks fun thought but just wouldnt run that car here in america. You might get shot in detriot if ya did.. lol
There has to be something wrong with a h22 in a 3gee to only run a 15. Thats sorta depressing to see that.I was thinkin the h22 to at least run a 13 in a 3rd gen. Even with slight mods to it .


And after all that you have a car thats useless for anything but racing....unless youre into driving a tin can on a daily basis


Who cares if the car wouldnt mesh well in America...hes not in America

[Tommy AC89 Thailand]

yeah sorta slow soundin to me too. looks like your got a gauge for everything in it. Wow. . .you need to loose all that weight you got in it.. And boy i wouldnt drive that at the track around here only runnin high 15's with the bright green paint i probably would get jumped at the track.. lol maybe take the body kit off primer it black then get rid of all the stickers on it take out all the interior even the door panels everything but the dash and the drivers seat. take the old gas tank out and put in a allluminum one in the trunk then drop it a inch in the rear and a 1 and a qyurter in the front. and run 15 inch rims with tires on it with low tire pressure. looks fun thought but just wouldnt run that car here in america. You might get shot in detriot if ya did.. lol
There has to be something wrong with a h22 in a 3gee to only run a 15. Thats sorta depressing to see that.I was thinkin the h22 to at least run a 13 in a 3rd gen. Even with slight mods to it .

15.31 sec not to bad for my car because, when I ran the best recorded Honda Prelude a lot modified with the engine H22A it's ran just only 14 sec something...
And the other resson I use this car everyday why I have to take off all the parts from my car?
About the gauges I swap brown console Japan spec so I took its off already.

[-$MOKIN-]

WOW. a bUNCH OF PPL SELLING ME ON HOW 15.3 ISNT BAD. Well PEOPLE 15.3 IS A VERY WEAK AND SLOW QUARTER MILE TIME. GET OVER IT.

[Rendon LX-i]

WOW....i would beat you then...im not beening mean i ran that with i/h/e and cam. My buddy has a cb7 with a jdm h22a and running 13.9 all day...so something is wrong man. Ethier your not shifting fast enough or Not taking off the line quick enough...dont burn out so much..h22s have alot of Toque...I was runing your time stock with some minnor mods now that im boosted im hopeing for 13's lol... Dont get mad im just telling SOMETHING is wrong. has to be

p.s Its also has to do alot on how you drive....i learned alot buy some buddys..

Rendon

[cubert]

WOW. a bUNCH OF PPL SELLING ME ON HOW 15.3 ISNT BAD. Well PEOPLE 15.3 IS A VERY WEAK AND SLOW QUARTER MILE TIME. GET OVER IT.


Hey...how fast is your H22 swapped 3gee?


Oh...wait

[88LXi68]

WOW. a bUNCH OF PPL SELLING ME ON HOW 15.3 ISNT BAD. Well PEOPLE 15.3 IS A VERY WEAK AND SLOW QUARTER MILE TIME. GET OVER IT.

Agreed. If I did that swap and had that time I wouldn't be happy.

Hey Tommy THailand...what mph did you trap?? what was the 60' ft?? That could help us tell if it is your motor/tuning or your driving!!

[AccordB20A]

lol

[Tommy AC89 Thailand]

Everybody please don't using slang words.
That I don't understood of the words and meaning...!
I'm asian.
Many thank.
Tommy...

[3rd Party]

i think everyone should lay off Tommy Boy here...low 15's on a STOCK H22 is not bad in the slightest bit, especially considering the trim of his car. like i said TurboII's run low 15's and they're fucking turbo rotaries. so hell, i'd be proud of a low 15 second H22 in stock trim. i say, it's time for a flashed ECU with a cam, and injectors. if you build it, they will come! :thumbup:

[Tommy AC89 Thailand]

i think everyone should lay off Tommy Boy here...low 15's on a STOCK H22 is not bad in the slightest bit, especially considering the trim of his car. like i said TurboII's run low 15's and they're fucking turbo rotaries. so hell, i'd be proud of a low 15 second H22 in stock trim. i say, it's time for a flashed ECU with a cam, and injectors. if you build it, they will come! :thumbup:

Thank a lot for your comment.
I don't care about who said my car to slow because it's more faster than many new cars that I try before.
And here is Thailand not America.
And I don't care who said my car is ugly with my URAS bodykits because, everybody can do anything with your own car and your money right?
Who care?
This is my style for modified my Accord 89 or CA5.
Tommy...

[3rd Party]

no problem man, everyone over here's always talkin' about how they want the parts off your stock cars, 'cause our American Accords aren't as fashionable, yet come around with slanderous statements about your ride. i like the lime green wheels, and all this bullshit about gauges adding weight is fucking nonsense, just do your thing, and keep it real. that's what it's about, just keepin' it real. :thumbup:

[Tommy AC89 Thailand]

no problem man, everyone over here's always talkin' about how they want the parts off your stock cars, 'cause our American Accords aren't as fashionable, yet come around with slanderous statements about your ride. i like the lime green wheels, and all this bullshit about gauges adding weight is fucking nonsense, just do your thing, and keep it real. that's what it's about, just keepin' it real. :thumbup:

Yes! I agree with you man.
I'm don't lie anything is true.
This car my dad bought when I'm 11 yearolds
I modified this car for 9 years until now.
I swap so many parts by my self.
I like lime green because when I lived in Melbourne Australia.
I found one CRX lime green very beautiful.
So that when I came back to Thailand I wanna swap colour of my car to lime green.
Aussie style for modified car they painted with pearl colour effect and swap with chromium wheel about interior alway changed in many colours.

http://www.hi5.com/friend/photos/displayMyPhoto.do?photoId=1551174151&albumId=178902205&ownerId=229208928

[-$MOKIN-]

Tommy. .I think that you have a lot of work into your car. Way more work than i have put in my car..I am not tryin to put your car down at all. People have a differnt eye on there style of car. Hell man you put a h22 in a 3gee i congradulate you on that. I am just disapointed becuase the only way to trick this car out is to do a bigger engine swap like you did, Which i have been wanting to do, and when you see that time on it it just makes me think that its a lost headache. I always thought that a h22 would at least give me 14's stock . And then maybe doing a couple things to it and tune it up that i might be able to get into the 13's. I think its cool that you actually do what i always wanted to do with a 3 gee. I might do things differently than you but its still sweet to see a 3gee out there. Maybe sometime you can make us a video of your car and other cars at your track. It would be interesting to see all the jdm things you guys have out there compared to our cars. To bad you wouldnt start a little business for all of us americans ,like ebay, and start hitting the junk yard for us and shipping us stuff over.

[cubert]

no problem man, everyone over here's always talkin' about how they want the parts off your stock cars, 'cause our American Accords aren't as fashionable, yet come around with slanderous statements about your ride. i like the lime green wheels, and all this bullshit about gauges adding weight is fucking nonsense, just do your thing, and keep it real. that's what it's about, just keepin' it real. :thumbup:


well said

[-$MOKIN-]

ahhh you guys ..

[-$MOKIN-]

Hey...how fast is your H22 swapped 3gee?


Oh...wait

If i did a h22 swap and got those results i would be pissed .

[thegreatdane]

WOW....i would beat you then...im not beening mean i ran that with i/h/e and cam.

If you ran at the same strip you wouldnt beat him. Look at the qm times everyone else with those mods have and you'll see that those are significantly slower.
Try to repeat that time of yours at another track, I doubt it would happen.

[thegreatdane]

If i did a h22 swap and got those results i would be pissed .

Until you do and prove that you would be able to actually run a better time than him, stop bashing.

[3rd Party]

it's kind of funny how easily things get out of hand, :rocket:

[Rendon LX-i]

If you ran at the same strip you wouldnt beat him. Look at the qm times everyone else with those mods have and you'll see that those are significantly slower.
Try to repeat that time of yours at another track, I doubt it would happen.

Not to burst your bubble bro...i ran 15.3 all day gutted 3gee and just my seat and tires set at 15psi....so dont be telling me what i ran....i can prove it i just got to go fine my stack of time slips.......IM not a lier....yea on 3rd gear pull a h22 probly pull on me....never tryed but enough said ....:Owned2: AND if i do it now I WOULD beat one easily..remember im boosted and be carefull how you say things.

[turabaka]

Not to burst your bubble bro...i ran 15.3 all day gutted 3gee and just my seat and tires set at 15psi....so dont be telling me what i ran....i can prove it i just got to go fine my stack of time slips.......IM not a lier....yea on 3rd gear pull a h22 probly pull on me....never tryed but enough said ....:Owned2: AND if i do it now I WOULD beat one easily..remember im boosted and be carefull how you say things.

I think you're forgetting that he's probably at a higher elevation than you, hence the reason for the slower times.

[ghettogeddy]

im sorry good work and all but its:rice::barf:

[thegreatdane]

remember im boosted and be carefull how you say things.

lol and how am I saying things? I'm not telling you what you ran, I'm telling you that you wouldn't run the same time if you were on the same track as him.

[Rendon LX-i]

LOL.....shit man your cool...i dont care....all i like is his motor. Anyways i dont want bad terms with you and no one else...if thats what he likes good...good to see someone putting time and heart...LOL...we cool? im hoping to hit 14s maybe high 13s...ill post a dyno vid soon..im going to get tuned at the same time..?

[Tommy AC89 Thailand]

Tommy. .I think that you have a lot of work into your car. Way more work than i have put in my car..I am not tryin to put your car down at all. People have a differnt eye on there style of car. Hell man you put a h22 in a 3gee i congradulate you on that. I am just disapointed becuase the only way to trick this car out is to do a bigger engine swap like you did, Which i have been wanting to do, and when you see that time on it it just makes me think that its a lost headache. I always thought that a h22 would at least give me 14's stock . And then maybe doing a couple things to it and tune it up that i might be able to get into the 13's. I think its cool that you actually do what i always wanted to do with a 3 gee. I might do things differently than you but its still sweet to see a 3gee out there. Maybe sometime you can make us a video of your car and other cars at your track. It would be interesting to see all the jdm things you guys have out there compared to our cars. To bad you wouldnt start a little business for all of us americans ,like ebay, and start hitting the junk yard for us and shipping us stuff over.

Cool man!
Well I think about in Thailand got a lot of second hand parts from Japan like the mountain in Bangkok.
And a lot of engine like the mountain too.
So if who need any Accord parts from me just let me know.
But, How can I send all of stuff to America?
How I can get money from America?
Who can make sure for me?
American embassy cancle my visa when I wanna go to Atlanta for study there for no reason many year ago.
I'm not a terrorist...!
Bull shit...!
Disappointed...!
Spent a lot of money with non refund...!
I knew one american girl her name is Susie from Denton Maryland.
We met at Thailand when I work with Habitat for humanity.
She is a volunteer.
I contact with her about 2 years.
But, now I don't cotact with her any more because she never pickup the phone and sent email back to me.
She broke my heart...!
So....sad...!
Tommy
http://photos1.hi5.com/0031/344/248/Q9Aa0m344248-02.jpg
http://photos1.hi5.com/0030/525/100/ptK.N2525100-02.jpg
http://photos1.hi5.com/0030/233/552/woN7F7233552-02.jpg
http://photos4.hi5.com/0028/412/575/dtrFiW412575-02.jpg
http://photos3.hi5.com/0029/002/062/kk7K10002062-02.jpg

[Rendon LX-i]

sorry to hear man...Well good work..you got to tell us how you got the 95 accord gauge cluster to retrofit.

[Tommy AC89 Thailand]

sorry to hear man...Well good work..you got to tell us how you got the 95 accord gauge cluster to retrofit.

I bought the dash board from Bangkok.
And I installation by my self.
First you have to take off your console and cut in side console and the cover then you can put the dash board in side but, you have to swap the eletric plug and checking the eletric wire with the machinist conecting to the old eletric wire and your new engine.

[Tommy AC89 Thailand]

I will go to Bangkok to buy sunroof Accord 89 and bring its back to Nakhonratchasima province my home town 3 hours drive from Bangkok.
And I will installation the sunroof at the paint shop.
Maybe at the end of this month.
9,500 Baht for sunroof * 35 = 271 $
4,500 Baht fro Installation * 35 = 129 $
http://rcw.ms/forums/attachment.php?attachmentid=1227516&stc=1&d=1233883327
http://rcw.ms/forums/attachment.php?attachmentid=1227515&stc=1&d=1233883289
http://rcw.ms/forums/attachment.php?attachmentid=1227514&stc=1&d=1233883218
http://rcw.ms/forums/attachment.php?attachmentid=1227513&stc=1&d=1233883183
http://rcw.ms/forums/attachment.php?attachmentid=1227510&stc=1&d=1233882837

[Rendon LX-i]

good to hear.

[3rd Party]

good to hear you've got good things ahead in your future with your Accord, i'm trying to keep that same path.

['A20A3']

I knew one american girl her name is Susie from Denton Maryland.
We met at Thailand when I work with Habitat for humanity.
She is a volunteer.
I contact with her about 2 years.
But, now I don't cotact with her any more because she never pickup the phone and sent email back to me.
She broke my heart...!
So....sad...!
Tommy

dude i live in easton maryland. denton is like 15 minutes away from me.

[Rendon LX-i]

Is there anyway you can ship parts tommy...I want a maplight so bad...that roof gots one...but if can get one...i pay what you want for it and shipping...let me know

[Tommy AC89 Thailand]

dude i live in easton maryland. denton is like 15 minutes away from me.

She work at (GNC) The shoppes Of Easton Elliot Rd. MD.
Did you know her?
Please tell her "I miss her"

[Tommy AC89 Thailand]

In Bangkok Thailand got a lot of 3gee stuff that, I can find what ever I want and I have a lot of stuff at my house too.
http://rcw.ms/forums/attachment.php?attachmentid=1211823&stc=1&d=1232328430
http://rcw.ms/forums/attachment.php?attachmentid=1211827&stc=1&d=1232328485
http://rcw.ms/forums/attachment.php?attachmentid=1214222&stc=1&d=1232500870
http://rcw.ms/forums/attachment.php?attachmentid=1214223&stc=1&d=1232500900
http://rcw.ms/forums/attachment.php?attachmentid=1225383&stc=1&d=1233708993
http://rcw.ms/forums/attachment.php?attachmentid=957957&stc=1&d=1209374755
http://rcw.ms/forums/attachment.php?attachmentid=957959&stc=1&d=1209374839
http://rcw.ms/forums/attachment.php?attachmentid=915209&stc=1&d=1205729701
http://rcw.ms/forums/attachment.php?attachmentid=915197&stc=1&d=1205728936
http://rcw.ms/forums/attachment.php?attachmentid=1069584&stc=1&d=1218974426

[Rendon LX-i]

are you willing to ship them...I want maplight lol

[A18A]

it's cool knowing there are people all over the world who whore 3gee parts :D

[3rd Party]

i can't imagine how expensive shipping would be from Thailand to the states...but i'm sure it'd be pretty expensive

[Tommy AC89 Thailand]

Yesterday I went to Bangkok for bought Accord 89 blue and black floor mat and emergency firework Accord 95 Japan spec.
About the mat 5 pieces 900 Baht = 26 $
About emergency firework 100 Baht = 3 $
http://rcw.ms/forums/attachment.php?attachmentid=1243446&stc=1&d=1235278388
http://rcw.ms/forums/attachment.php?attachmentid=1243447&stc=1&d=1235278439
http://rcw.ms/forums/attachment.php?attachmentid=1243449&stc=1&d=1235278480
http://rcw.ms/forums/attachment.php?attachmentid=1243450&stc=1&d=1235278546
http://rcw.ms/forums/attachment.php?attachmentid=1243451&stc=1&d=1235278574

[Tommy AC89 Thailand]

Also I met my friend Accord 88 4G93 Turbo.
Photos update of his car.
http://rcw.ms/forums/attachment.php?attachmentid=1243402&stc=1&d=1235275869
http://rcw.ms/forums/attachment.php?attachmentid=1243403&stc=1&d=1235275896
http://rcw.ms/forums/attachment.php?attachmentid=1243404&stc=1&d=1235275924
http://rcw.ms/forums/attachment.php?attachmentid=1243405&stc=1&d=1235275967
http://rcw.ms/forums/attachment.php?attachmentid=1243406&stc=1&d=1235276001
http://rcw.ms/forums/attachment.php?attachmentid=1243408&stc=1&d=1235276188
http://rcw.ms/forums/attachment.php?attachmentid=1243409&stc=1&d=1235276211
http://rcw.ms/forums/attachment.php?attachmentid=1243410&stc=1&d=1235276232
http://rcw.ms/forums/attachment.php?attachmentid=1243411&stc=1&d=1235276259
http://rcw.ms/forums/attachment.php?attachmentid=1243412&stc=1&d=1235276286

[3rd Party]

so do you guys ship things over seas based on weight, or size, or how??

[cubert]

very nice

[Tommy AC89 Thailand]

so do you guys ship things over seas based on weight, or size, or how??
I checked in the internet and go to Bangkok.

[-$MOKIN-]

Tommy are there any b20's at the junk yard. There are like a million people over here looking for this motor. And probably alot of people looking for parts off of it.the folding mirrors have been a big hit. And the map light was sweet. I didnt even know there was one. Also the leather interior is hard to come by . Unlike were you live, in some places around here these cars can actually be hard to find in a junk yard. When i lived in detroit michigan, I could not find a 3rd generation accord becuase they would just crush them. But that is the motor city where mostly all american cars are from.So having a honda is not a good idea in detroit. When there is no work for the people becuase they were all smart and bought hondas.lol
Wow i type way to quick and just ramble on. Anyways dude i think your cool as sht man. You got and pics with your rims painted green on there? Post em up.Im glad yo found www.3geez.com becuase like all of us here your a true blue when it comes to "The Honda" is what i call her.

[SILENT]

tommy you guys have alot of suspension parts available for 3geez huh???

[AccordB20A]

Tommy are there any b20's at the junk yard. There are like a million people over here looking for this motor. And probably alot of people looking for parts off of it

they can get them from me but no ones wanting any so i dont think theres much people wanting b20a's nemore, but i bet there should be a few and manual boxes over there

[Rendon LX-i]

I checked in the internet and go to Bangkok.

Let us know man...welling to get some parts. duch tail. maplight. jdm side markers

[-$MOKIN-]

they can get them from me but no ones wanting any so i dont think theres much people wanting b20a's nemore, but i bet there should be a few and manual boxes over there

HUH you can get b20's and noone is wanting one? Of course i want onE

[2oodoor]

HUH you can get b20's and noone is wanting one? Of course i want onE

how bad do you want one?

[Tommy AC89 Thailand]

You have to believe me in Bangkok got a lot of Engine B20A like the mountain...!
How many do you want?
I didn't take a photo yet.
I don't know how to ship all of the parts to America and how I can get money from you guy?
Who want to investment with me though?
I don't find any map lights yet just come together with the sunroof.
Last time I found 4 door visors/rainguards just only 700 Bahts = 20 $

[Rendon LX-i]

wow thats crazy a dsm motor in a 3g lol....insane

[MessyHonda]

now they can swap anything

[-$MOKIN-]

Wow ..Dude it would be worth the flight over there. Isnt there a naval base over there? It would be sweet to be able to send a couple cars with a couple dudes that are based there back to america
Or better yet create a whole new business in Cali and have tommy be our connect for massive quanities of jdm parts and accessories.

[Tommy AC89 Thailand]

Wow ..Dude it would be worth the flight over there. Isnt there a naval base over there? It would be sweet to be able to send a couple cars with a couple dudes that are based there back to america
Or better yet create a whole new business in Cali and have tommy be our connect for massive quanities of jdm parts and accessories.

No! Thailand don't have American naval base just in Philippine, but I think we can ship to America in the cargo.
I found this car for sale 94,000 Baht = 2,685 $
http://rcw.ms/forums/attachment.php?attachmentid=1060585&stc=1&d=1217998396
http://rcw.ms/forums/attachment.php?attachmentid=1060587&stc=1&d=1217998426
http://rcw.ms/forums/attachment.php?attachmentid=1060588&stc=1&d=1217998446
http://rcw.ms/forums/attachment.php?attachmentid=1060589&stc=1&d=1217998462

['A20A3']

HUH you can get b20's and noone is wanting one? Of course i want onE

i want a B20A and a 5-speed box as well...and i have money...

[-$MOKIN-]

Yea i want a b20 too with everything that coems with the swap. How much does all that cost tommy ? Like how much would a b20 with 5 speed and wireharness all the moutns all the wiring and the ecu that i would need to do the swap cost over there?

[A18A]

that 3gee looks nice! it looks like a auto though judging by the TV cable (N) what's that hose attatched to the intake pipe that goes to that metal round thing for?

[Hauntd ca3]

that 3gee looks nice! it looks like a auto though judging by the TV cable (N) what's that hose attatched to the intake pipe that goes to that metal round thing for?

that looks like an lpg liquid to gas converter to me matt
and it is an auto, you can see the lockup solenoid under the cam positon sensor