i need help

[fijisac]

well i had a blown head gasket 3 weeks back. i replaces the gasket and i got the head rebuilt for $260 with new seals, springs, and valves. so i put the motor back together and when i started it up, there was a big cloud of white/light blue smoke coming out the exhaust pipe so i waited for 5 minutes to see if it would go away and it did not, so what can be the problem?

[itzdave]

id check the timing belt and make sure its installed properly. 3or 4 teeth out and it could run bad... does it make any ticking sounds or anything?

[Pico]

light blue smoke sounds like oil burning

[fijisac]

id check the timing belt and make sure its installed properly. 3or 4 teeth out and it could run bad... does it make any ticking sounds or anything?

well it does run rough after 3000 RPM but before 3000 Rpm it runs fine

[fijisac]

light blue smoke sounds like oil burning

well that's what i thought but the oil level was still the same after i drove it

[2oodoor]

did you change the oil after the headgasket job?
PVC system intact?
retorque the head?

[mephi]

Make sure the timing is set properly, and then run a compression test.

[fijisac]

did you change the oil after the headgasket job?
PVC system intact?
retorque the head?

well ok i did change the oil and re torqued the head but i need help with the PVC system cause i have no idea what that is:uh:

[itzdave]

yea, id do a comp test on it too...

[russiankid]

How about you just drive the car for a bit? You just changed the head gasket. I would not be surprised if theres still water in the exhaust that is burning off.

[Civic Accord Honda]

How about you just drive the car for a bit? You just changed the head gasket. I would not be surprised if theres still water in the exhaust that is burning off.
yeah what he said, when i took the exhuast off my dx (parts car that had a blown head gasket ) and put it on my lxi the car smoked like fuck for atleast a hours worth of driving time

[Rendon LX-i]

its a blown gasket. idk what you could of done wrong. Maybe over tighen the head gasket. did you torque to specs.

Head bolts are:

Step 1:22 ft-lbs
Step 2:29 ft-lbs

If you didnt do that then thats your problem

[fijisac]

its a blown gasket. idk what you could of done wrong. Maybe over tighen the head gasket. did you torque to specs.

Head bolts are:

Step 1:22 ft-lbs
Step 2:29 ft-lbs

If you didnt do that then thats your problem

well no i torqued it to
Step 1:22 Ft-lbs
Step 2:49 Ft-lbs

[fijisac]

How about you just drive the car for a bit? You just changed the head gasket. I would not be surprised if theres still water in the exhaust that is burning off.

really, i did not know that, thx:lock:

[Rendon LX-i]

well no i torqued it to
Step 1:22 Ft-lbs
Step 2:49 Ft-lbs

I meant that LOL...

[fijisac]

I meant that LOL...

but yea, thats what i did, by the way do you know where i can get a complete vacuum diagram for a 89 accord carb

[Rendon LX-i]

Pauls web site. has service manual downloads. LEt me go get it real quick

[Rendon LX-i]

http://www.pauldesign.ru/honda/shopmanual.html

The one below is other if the one on top dont work

http://honda.roadpwnage.com/manuals/...-1989-full.php

[fijisac]

http://www.pauldesign.ru/honda/shopmanual.html

The one below is other if the one on top dont work

http://honda.roadpwnage.com/manuals/...-1989-full.php

thx man ur a big help and oh by the way do u know where the PCV or PVC valve is located

[Rendon LX-i]

Right inbetween the runners. so ()()HERE()() you'll see a tube with a piece of foam pretty much. And its a metal valve. no plastic

[fijisac]

Right inbetween the runners. so ()()HERE()() you'll see a tube with a piece of foam pretty much. And its a metal valve. no plastic

alright thx

[Rendon LX-i]

No prob. that manual well tell you everything bro.