PDA

View Full Version : Is there a USDM oil pan gasket for B20A?



2ndGenGuy
03-15-2009, 01:08 PM
Title says it all. Can't find it in the FAQs or by searching my ass off. I tried a B20A5 oil pan gasket and it's close, but no cigar. The A20 one doesn't look like it would work, but I did not try one yet.

2ndGenGuy
03-15-2009, 01:34 PM
After more searching, I think that's a big fat NO. I think it should also be a sticky that there is no USDM oil pan gasket, as it's a pretty common part to need. Or there needs to be a parts list for parts you can't get for the B20A here. But whatever, I'll call TwoLoudnProud's supplier and see if I can get just a pan gasket from them. I don't need the whole set right now. Maybe down the road, but then I'll have a set without a pan gasket. :(

carotman
03-16-2009, 04:41 AM
You're right. There's no pan gasket that will fit :(

I ordered a couple of spare ones last time so I should be Ok.

You can always use the permatex stuff

'A20A3'
03-22-2009, 04:46 PM
HondaBond FTW

Ichiban
04-27-2009, 07:42 PM
I sifted through pages of spanish and found the actual AJUSA corporation listing for the B20A.

http://www.ajusa.es/CataOnLine/eng/index.php?com=aToxNzgzMzs=

AccordB20A
04-27-2009, 09:00 PM
catalogo even good find

lostforawhile
04-27-2009, 10:34 PM
After more searching, I think that's a big fat NO. I think it should also be a sticky that there is no USDM oil pan gasket, as it's a pretty common part to need. Or there needs to be a parts list for parts you can't get for the B20A here. But whatever, I'll call TwoLoudnProud's supplier and see if I can get just a pan gasket from them. I don't need the whole set right now. Maybe down the road, but then I'll have a set without a pan gasket. :(

why are you having trouble finding a usdm oil pan gasket? it's not uncommon for the dealers to not carry that stuff as it's well supported by the aftermarket. I used a felpro last time, it's fine.

2ndGenGuy
04-27-2009, 11:39 PM
why are you having trouble finding a usdm oil pan gasket? it's not uncommon for the dealers to not carry that stuff as it's well supported by the aftermarket. I used a felpro last time, it's fine.

Thread title ^^^

lostforawhile
04-27-2009, 11:44 PM
Thread title ^^^wouldn't usdm and b20a be an oxymoron? they make some pretty good gasket making stuff now, will seal an oil pan up easy. not rtv, but the stuff that is designed to actually replace the gasket itself.

AccordB20A
04-28-2009, 12:37 AM
someone try an a20 gasket! lol

Ichiban
04-29-2009, 05:48 PM
someone try an a20 gasket! lol

I'd fuckin explode if it actually worked..

russiankid
04-29-2009, 06:18 PM
Would the part numbers from Honda be the same all over? If so then just have one of the NZ guys find out the part number for the gasket and then cross reference the part number.

mykwikcoupe
04-29-2009, 07:49 PM
yes we tried it when he came up and they arent anything even close to each other. Sorry about that again jon

TWOLOUDNPROUD
04-29-2009, 08:59 PM
B20a oil pan gasket by AJUSA P/N 14061000 go here to get it Supplier MACHINE PRO in Florida 1-800-741-4496 ask for Randy

2ndGenGuy
04-29-2009, 11:23 PM
yes we tried it when he came up and they arent anything even close to each other. Sorry about that again jon

No worries! :)

RobT5580
04-30-2009, 12:12 PM
OEM JDM ones are no longer available to my knowlede along with many other parts!

AccordB20A
04-30-2009, 01:47 PM
you got the last b20a head gaskets, john got the last sump gaskets... arrrrrr lol im selling all the parts i could be using to the USA and now theres nothing for me to use lol

2ndGenGuy
04-30-2009, 02:09 PM
Yay one is on my motor and the other one is sitting in my house. The last OEM B20A sump gasket in existence!! All MINE!!!

carotman
05-01-2009, 07:48 AM
Oh, I'm glad I have a couple of spare ones then.

snoopyloopy
05-01-2009, 08:03 AM
Yay one is on my motor and the other one is sitting in my house. The last OEM B20A sump gasket in existence!! All MINE!!!

get it copied and carefully analyzed!

Nafs Asdf
05-01-2009, 08:48 AM
Looked up some EDM part numbers in the EPC

11251-PH3-000 - oil pan gasket, all EDM B20A's

12251-PH3-601 - head gasket, B20A2
12251-PH3-661 - head gasket, B20A8

12251-PJ5-602 - head gasket, B20A1 (2g prelude)

Weird how they all have different part numbers for the head gasket, aren't they all the same?