View Full Version : bolt size question?
itzdave
03-31-2009, 12:14 PM
i had a bolt or two fall out and i have faith that someone here could possibly help me. ok, ya know the 'dogbone' motor mount thing that attaches to the firewall? it connects to a brackety thing that is bolted to the block... i need to know the bolt sizes for the bolts that hold that bracket to the block.
thanks in advance...
AccordB20A
03-31-2009, 12:17 PM
14mm socket to undo the but maybe u mean the length or them too?
itzdave
03-31-2009, 12:25 PM
yea if possible could i get the dia of the bolt and the lenth. cuz i have to go get new bolts and sometimes a bolt with 14 head from the car wont match up with a bolt from the store with a 14 head.
russiankid
03-31-2009, 12:45 PM
14mm is just the head. I think he needs the thread type. I know one of my transmission bolts is bigger than the rest because I had to replace it.
#17 and #16.
http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=ACCORD&catcgry2=1989&catcgry3=4DR+LX&catcgry4=KA5MT&catcgry5=TORQUE+ROD-FRONT+BEAM
itzdave
03-31-2009, 12:48 PM
14mm is just the head. I think he needs the thread type. I know one of my transmission bolts is bigger than the rest because I had to replace it.
#17 and #16.
http://www.hondaautomotiveparts.com/auto/jsp/mws/prddisplay.jsp?inputstate=5&catcgry1=ACCORD&catcgry2=1989&catcgry3=4DR+LX&catcgry4=KA5MT&catcgry5=TORQUE+ROD-FRONT+BEAM
sweetness! that should do the job, thanks!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.