PDA

View Full Version : Need help adjusting my valve clearance



Hazwan
05-04-2009, 04:30 PM
I've got everything in order except the reverse-flow design confused the hell out of me. Which is the intake valve and which one is the exhaust?

http://img.photobucket.com/albums/v197/ullyeus/SN850284.jpg

I know the far ends are intake (or at least I thought it is), but the middle 4 valves? halp!?

Ichiban
05-04-2009, 05:03 PM
Can you peek under at the shape of the intake/exhaust, and determine from there? I seem to remember some of those engines had siamesed exhaust ports, which would mean the 2nd and 3rd from each end would be exhaust.

79cord
05-04-2009, 11:04 PM
IEEIIEEI Intake- Exhaust valve layout until the 2nd gen Accords.
Valve clearances of
0.12-0.17mm Intake
0.25-0.30mm Exhaust
According to the '79 manual.

Hazwan
05-05-2009, 05:25 AM
Sweet thanks!

Well, I've decided to put everything back together since I couldn't break the retaining nut free haha. At least not now since I've hurt my back again and it ain't fun.

2ndGenGuy
05-07-2009, 03:07 PM
Oh there you go. 79Cord always coming through with the good info. I was gonna post this, it's for 1981. Top are intake, bottom exhaust.

http://i66.photobucket.com/albums/h256/jgturk/intake.jpg

Ichiban
05-07-2009, 08:25 PM
Cool. Just the way I thought it was...be damned if I can remember my own layout though...