PDA

View Full Version : Wheee Gay new oil leak



mushroom_toy
05-18-2009, 03:34 PM
Alright so thinking it was the distributor o-ring, i bought one and went to put it on. The old o-ring looks brand new but im gonna put the new one on anyway, what do yall think this could be coming from, im gonna clean it off, put the dizzy back on and see if i can see where its coming from. i know I need to reseal the valve cover gasket as well, but I know its not leaking that much, it was leaking this way before the new vc gasket.

http://img.photobucket.com/albums/v28/JubeiMunchCurry/QD/IMGP4900.jpg
http://img.photobucket.com/albums/v28/JubeiMunchCurry/QD/IMGP4902.jpg
http://img.photobucket.com/albums/v28/JubeiMunchCurry/QD/IMGP4904.jpg

Civic Accord Honda
05-18-2009, 03:42 PM
MY civic leaked like that, i replaced the dizzy o ring and head gasket and that seemed to of fixed it

russiankid
05-18-2009, 03:51 PM
Looks like its the head gasket.

Rendon LX-i
05-18-2009, 05:31 PM
x2

SILENT
05-18-2009, 05:39 PM
Looks like its the head gasket.

x3... my sei looked like that so replaced the head gasket and nows its nice and dry!!!

MessyHonda
05-18-2009, 07:15 PM
compression test time

Rendon LX-i
05-18-2009, 07:31 PM
x2 lol

LX-incredible
05-18-2009, 08:55 PM
Distributor shaft seal? the oil drain/vent is on the bottom.

mushroom_toy
05-18-2009, 10:19 PM
replaced dizzy orin, put some silicone on vc and its still leaking arrrr i hope its not the hg but im gonna do a comp test tomorrow

Rendon LX-i
05-18-2009, 11:01 PM
it is....has to be...thats how mine was to...thats when i decided to do the rebuild.....Thats alot of oil for a o ring....when i had a bad oil ring it only leaked when i got on it....so thats a hg brother...get er done...dont take long

labeledsk8r
05-18-2009, 11:03 PM
hate to say it that looks like a head gasket leak, cant think of much else on that side besides the dizzy o-ring

2oodoor
05-19-2009, 03:47 AM
mine leaked a little like that some time after a HG job, I just retorqued the head and it stopped.
With those miles though a head gasket and valve work is not out of line really. Check your pvc system.