PDA

View Full Version : Making Clear Corners


Thorny88Lx
10-01-2002, 09:27 AM
I want to make some clear corners for my car. Could someone post or find a detailed description of how to make them? I would really appriciate it.
ssophab
10-01-2002, 09:41 AM
look in FAQ.
Thorny88Lx
10-01-2002, 09:48 AM
I looked, I dont want the bumper lens mind you, I want the turn signal, between the bumper and the front fender.
88LXiHB
10-01-2002, 10:49 AM
Take out the 2 screws between the headlight and blinker, take a Dremel tool, and cut out the yellow reflector part out of the blinker. Now I used the flouresent light covers (mentioned in hte FAQ for the tail light clears) I traced it to fit the hole that I just took the yellow part out of. finally got it to fit snug, then put a small clear silicone bead around the inside of the blinker hole, placed the clear piece, let dry over night, then reinstall them...


I suck at typing, so if any of that doesn't make sense let me know...:D
Thorny88Lx
10-01-2002, 12:43 PM
What materials do I need?
88LXiHB
10-01-2002, 03:05 PM
Originally posted by Thorny88Lx
What materials do I need?

Dremel
Overhead light covers (like office lights, the long flourecent ones...)
Clear silicone glue
Thorny88Lx
10-02-2002, 01:41 PM
What do I do about the lined part?