Nervous about removal..

[CzEcHy]

Ok so I've consulted BassMan and got lots of valuable info on the "variation" to the removal of vacuum lines... But I'm still nervous on everything lol..

Here is a picture of what I'm most concerned about (The boxes have my questions)

http://i10.photobucket.com/albums/a109/czechy/accordvaccum2.jpg



(Bass Man did the red boxes/circles so disregard those)

[import racer]

Just plug what you don't use.

[CzEcHy]

Ok so anything else I'll need to know? lol like I said I don't want to forget something small

[87AccordLXsdn]

Did you ever get this done? I'm looking into doing it, but am also nervous. ha

[charliekuney]

You never answered me about the fender and such. I have them all removed.

[2oodoor]

You could look around the JY for a carbed late eighyties Civic for a very simailr carb to these. Those have hardly any vaccum set ups, if nothng else could be used as a guide somewhat.

I got the pleasure of snagging all of it off using aftermarket carby. I say snag, it wasnt that easy since there are several 10mm brackets and more to get out.

[import racer]

It's not that hard,just remove the black box the hard lines everything,then start hooking things up.might be helpful to print out the pics for the removal.

[87AccordLXsdn]

soooo I have a Weber. From what I've gathered, all that needs to be hooked up is #25 joined with #2 going in to the back of the carb, correct?