3gee performance mounts

[MessyHonda]

alright pics are to come...i just finished the DIY poly on the a20 mounts
poly'd the driver side mount, front hydro mounts and the rear mount because when i pulled out my mounts of my a20 they were broken

[turabaka]

Very nice. I did that to my mounts, and it's definitely a better feel. I like not having the motor move at all when I gun it.

[LxAcc510]

in for pics =D

[gfrg88]

Solid mounts, ftw!! Idk what happened to the ones I had :dunno:

[Rendon LX-i]

i need to do this

['A20A3']

wheres the write-up on this?

i want in.

[Tdurr]

wheres the write-up on this?

i want in.

x2

[itzdave]

take pix! ill be doin it in about 3 weeks... then its 5-spd time!!!

[turabaka]

wheres the write-up on this?

i want in.

There isn't really a write up. Just grab a tube of 3m window weld, and a caulking gun. Then fill all the mounts with it. I did all of mine, and it definitely makes a difference. Doesn't look the prettiest though.

[A18A]

people take pics BEFORE posting a thread, then we don't have to be left in suspense waiting for them :)

[CzEcHy]

So what does this fix worn motor mounts <.<?

And do I have the take the mounts out to do it?

I r not so smart with common sense.

[turabaka]

So what does this fix worn motor mounts <.<?

And do I have the take the mounts out to do it?

I r not so smart with common sense.

It's the same as putting poly inserts into the mounts, just the ghetto way to do it.

[MessyHonda]

wheres the write-up on this?

i want in.

http://www.importnut.net/motormount.htm

[Rendon LX-i]

Also if its to stiff for you drill couple holes and it wont be so stiff

[CzEcHy]

It's the same as putting poly inserts into the mounts, just the ghetto way to do it.

I have an 88' Carb'd a20, all I need to do is jack up under the transmission like an inch or so (with a piece of wood ya) and I can remove the mounts correct?

Then just use the window weld and knock myself out.

[turabaka]

yep. Pretty much.

[CzEcHy]

Alright sounds like a fun learning experience, I won't learn anyway else.

[MessyHonda]

I have an 88' Carb'd a20, all I need to do is jack up under the transmission like an inch or so (with a piece of wood ya) and I can remove the mounts correct?

Then just use the window weld and knock myself out.

if you still have stock mounts chances are that they are broken....2 of out my 3 mounts were busted this is with 170k

[CzEcHy]

if you still have stock mounts chances are that they are broken....2 of out my 3 mounts were busted this is with 170k

Does this mean full replacement?


I've had to raise my idle to like 1000 IN D, and it goes up to 1500 in N cause it shakes so bad any lower.

(I'd like to get that fixed)

[b20a86lude]

holy cow im just about . to do this pllllzzzzz post pics and do a write up plzzz i want to know where u got ur urethane

[labeledsk8r]

holy cow im just about . to do this pllllzzzzz post pics and do a write up plzzz i want to know where u got ur urethane

its sold at walmart,kmart,home depot,lowes etc etc, take your mounts out fill with the stuff, reinstall... not much to it and really nothing to show in the pics

[MessyHonda]

cell pic time
http://img.photobucket.com/albums/v650/Messybone/LX-i/PIC-0136.jpg
http://img.photobucket.com/albums/v650/Messybone/LX-i/PIC-0137.jpg
http://img.photobucket.com/albums/v650/Messybone/LX-i/PIC-0138.jpg

lets hope they hold down this
http://img.photobucket.com/albums/v650/Messybone/LX-i/PIC-0133.jpg

[import racer]

So do you drill a hole in the bottom of the front mount to get the liquid ot and fill with urethane.

[MessyHonda]

i didnt...i just filled the flap under it with window weld...i tired moving it but the mount feels solid

[b20a86lude]

so wat did u use to keep it from spillin out b4 it drys

[A18A]

^^ I read somewhere that you can tape up one side of the mount, and fill it up and just leave it to dry, then remove the tape once it's dry.

cool mounts. now hurry up with teh b20 install :D

[MessyHonda]

^^ I read somewhere that you can tape up one side of the mount, and fill it up and just leave it to dry, then remove the tape once it's dry.

cool mounts. now hurry up with teh b20 install :D

i still need parts

[danny nr crew]

ok its bein about 16 or 17 hours since i filled the mounts with the 3m crap
the ? i got is how long do u have to wait for it to dry

[ohfoSHO?]

so all you did was fill the mounts?

[Rendon LX-i]

ok its bein about 16 or 17 hours since i filled the mounts with the 3m crap
the ? i got is how long do u have to wait for it to dry

one full day...24 hours...

[carotman]

I did it a while back but got rid of them. I was getting way too much vibration at idle.

[b20a86lude]

ok i couldnt find urethane so i found polurethane filler . at home depot.
its been about 18 hour and it still feels soft wat should i do i dont feel any hardness

[MessyHonda]

so all you did was fill the mounts?
yeah...it was a easy mod...i still have not put mine one tho

I did it a while back but got rid of them. I was getting way too much vibration at idle.
lol..i wish i had them with my a20...the thing would idle at 900 rpms because of the stage 2 cam

ok i couldnt find urethane so i found polurethane filler . at home depot.
its been about 18 hour and it still feels soft wat should i do i dont feel any hardness
not sure but i would wait some more...mine feels like a hard rubber

[turabaka]

ok i couldnt find urethane so i found polurethane filler . at home depot.
its been about 18 hour and it still feels soft wat should i do i dont feel any hardness

you found the right stuff. Just wait a bit longer. Mine took more than 24 hours to set properly. They were still a little soft after 24, but after 48 they were hard as a rock.

[mykwikcoupe]

so if you have the issue of the front mount tearing in half, how do you fix that? Id like to find a way to weld a bracket together and have this stuff as a buffer in the middle to work agaianst each part but its hard to explain. any thoughts

[b20a86lude]

thnx guys it workd like u said i have some poly urethane bushings that im gonan try use for the dog bone

[JohnBoy]

so for the front mount tell me what you think but soild mount it or may soild mount with a pholy ball joint bushing on it?