How to remove Front Bumper turn Signal?

[SharkyX]

i cant for the lif eof me get to this thing. I looke din the factory manual and it shows that you have to unscrew 2 screws to get it out (they arent really there the book is just wrong) if anyone has any pics or knowledge of this i would greatly appreceiate it

[ghettogeddy]

take the lil fog light cover off and look up there should be one screw to take out take it out and grab a flat head and lever the light out

[SharkyX]

ty will check it out tommorow

[conozo]

yes the fog light cover comes off, then there is one screw i believe that goes straight up, its surrounded by white plastic that holds the screw in there so it doesn't fall out. Then once you unscrew it the light pivots out on one of the sides.

You can see whats going on when you take the fog light cover off and look straight up inside the bumper with a flash light.

[w261w261]

Also I believe the light pivots on the outside end.

[MessyHonda]

yeah...you can help it by pushing it from the back and it will just pop out

[Croft]

The hidden screw is a Philips head reached from the foglight cover through a hole in the white styrofoam. Unscrew ir and then the lens housing will come out with the help of a pry with a flat screwdriver.