View Full Version : setting timing
madmod89lxi
10-02-2002, 09:16 AM
how do i set base timing on my 89 lxi there isn't any adjustment to dist. base?
:toilet:
ACCORD EX
10-02-2002, 10:27 AM
if you are talking about igniion timing !
there are two nuts i think 12mm , loosen those and adjust using a timing light aimed at the hole @ the flywheel ! i 've heard before tha some vacuum lines should be disconnected ! not sure about that ! i do it without disconnecting anything !
MIKE
madmod89lxi
10-02-2002, 10:59 AM
i figured it out its 3 10 mm bolts wih caps over them
ACCORD EX
10-02-2002, 11:10 AM
3 bolts ????
i think you got the wrong ones ! not sure about efi though ! :(
do you have a hitachi or a tec distributer ( tec dist. has teh igniter on it , the squared silver thing ! )
MIKE
anchovies
10-02-2002, 12:54 PM
fi has 3 bolts
disconnected the vacumm advance
madmod89lxi
10-04-2002, 03:15 PM
mine has silver box and 3 bolts so should i disconect the vacume advance 4 good or just to set timing?
anchovies
10-05-2002, 07:00 PM
Disconnect it just to set your timing
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.