Strut Tower Bar...

[TsubohachiLX-i]

Hello 3GEEZ...!!!


Can someone tell me what STRUT TOWER BAR would fit my LXi?

[Joay]

DC Sports is the only one that was made specifically for our cars, as far as I know. Some custom sets were made by someone here some time ago, but I don't know if you can find any brand new ones that will bolt right on. You can make a 90-93 Accord bar fit the rear with some cutting and welding. If you're handy you can likely do the same with the front.

[labeledsk8r]

**edit** ^^ beat me to it LOL

DC "made" one for the 3g but its no longer in production so good luck locating one, as of right now other then that you have to make a custom one or find one of "justin's" bars (was a member that made a limited run of tower bars).

[TsubohachiLX-i]

What about using a Strut Tower Bar from another vehicle, like a civic or integra?

[Tomisimo]

mounts will have to be custom made then..

[Tdurr]

What about using a Strut Tower Bar from another vehicle, like a civic or integra?

4th gen accord bar works for the rear with some cutting and welding. Need to move the hold like a inch closer and a few degrees inwards.


http://i28.photobucket.com/albums/c220/TheDarkDarkRacer/strutbar2.jpg
http://i28.photobucket.com/albums/c220/TheDarkDarkRacer/strutbar.jpg
http://i28.photobucket.com/albums/c220/TheDarkDarkRacer/strutbar5.jpg
http://i28.photobucket.com/albums/c220/TheDarkDarkRacer/strutdone.jpg

but i bolted mine up for a few days with only one hole attached and even then it made a difference.

[itzdave]

What about using a Strut Tower Bar from another vehicle, like a civic or integra?

what about that search button at the top of the screen?

[Joay]

4th gen accord bar works for the rear with some cutting and welding. Need to move the hold like a inch closer and a few degrees inwards.
I was looking for this post, forgot it was yours. Good stuff. :thumbup:

[Sabz5150]

Only two companies that I know of made tower bars for our vehicles: DC Sports and Ractive. Neither produce them anymore.

[lostforawhile]

I need to get busy and make some for mine before the plant goes bankrupt, lets see, steel, machinery for working with it, weld department, and chromaloy tubing hmmmm

[Tdurr]

I need to get busy and make some for mine before the plant goes bankrupt, lets see, steel, machinery for working with it, weld department, and chromaloy tubing hmmmm

lmk if u really wanna, i still have the specs i sent to Tomisimo.

[lostforawhile]

lmk if u really wanna, i still have the specs i sent to Tomisimo.

for front or rear bar? they would help a lot

[Tdurr]

rear. never got around to getting the front done.

[lostforawhile]

rear. never got around to getting the front done.

cool, the front will be a one off anyway to clear all the carb stuff

[Tdurr]

ill send u a pm later with everything.