View Full Version : Accord 89 Carburated
Spectro
09-07-2009, 04:14 PM
Well this is my car , i m from chile so.. my inglish is not good but i try :D
well about my car . really not have much information about this car
so any can help me about info and spec
Model Honda Accord 89 EX 100% JAPAN carburated
Motor A2A20
[center]
BiXenon VIPHID 8000K
ghettogeddy
09-07-2009, 04:37 PM
the wing needs to go asap it looks lie a whale trying to take flight lol
anyways
everythign else looks good the motor looks good a shinny
welcome to the site btw
jasonrebellion
09-07-2009, 04:47 PM
holy whaletail batman! nice car but the wing doesn't fit.....
Civic Accord Honda
09-09-2009, 12:44 PM
omgwing
MessyHonda
09-09-2009, 11:29 PM
la cola no se mira buena en el carro
Tomisimo
09-10-2009, 07:14 AM
'OMG the Wing.. it needs to go!! its not a Subaru, even they look ish with it.. But overall nice car..
PC youve been added to my msn :D
Dr_Snooz
09-10-2009, 07:57 PM
Welcome to the board! You have a very nice 3g ...with a very big wing. The car is great. The wing is not so great but we won't hate on you for it. If it helps you keep it up then rock on!
AccordB20A
09-11-2009, 01:42 AM
besides the wing, the car looks damn good, and the A20A2 motor with no vacuum lines is a beast. but the motors not JDM its european spec, JDM motors come with 46573847563854 vacuum lines and emissions bull
Civic Accord Honda
09-11-2009, 01:47 AM
is there alot of fixed headlight accords in Chile?
Nafs Asdf
09-11-2009, 03:08 AM
Look closely now, it's not EDM either.
Spectro
09-13-2009, 05:33 AM
in chile dont have much honda accord ... so is very hard find accesory.
i have a one dude
i found this information in the web , the information i found fits the description of my car?
or i am wrong?
Motor
1989 Honda Accord 2.0 EX
Bore × stroke 85.00 mm × 88.00 mm
3.35 in × 3.46 in
Cylinders S-4
Displacement 2 litre
1997 cc
(121.864 cu in)
Type SOHC
Key: SOHCSingle overhead camshaft DOHCDouble overhead camshaft OHVOverhead valves TSTwo stroke SVSide valves SlSleeve valves oiseOverhead inlet side exhaust
4 valves per cylinder
16 valves in total
Construction
Sump
Compression ratio 8.90:1
Fuel system
Maximum power 111.5 PS (110.0 bhp) (82 kW)
@ 5700 rpm
Specific output 55.1 bhp/litre
0.9 bhp/cu in
Maximum torque 159.0 Nm (117 ft·lb) (16.2 kgm)
@ 3700 rpm
bmep 1000.5 kPa (145.1 psi)
Specific torque 79.62 Nm/litre
Maximum rpm
Manufacturer Honda
Code
Main bearings
Coolant Water
Bore/stroke ratio 0.97
Unitary capacity 499.25 cc/cylinder
Aspiration Normal
Compressor type N/A
Intercooler None
Catalytic converter
Perfomance
0-50 mph (80 km/h)
0-60 mph
0-100 km/h 10.90 s
0-100 mph
80-120 km/h (50-70 mph) in top
Standing ¼mile
Standing km
Top speed 183 km/h (114 mph)
Fuel consumption
CO2 Emissions
Carfolio Calculated CO2 ?
Power-to-weight 82.64 bhp/ton
A0060 31100-PH1-024 ALTERNADOR HONDA ACCORD 1984-89 CARBURADOR SISTEMA NIPONDENSO
* Exhaust: 4-1 Cast Manifold
* Induction: Carbureted 2bbl Keihin ( Feedback Carb )
* Displacement: 1,955 cc (119.3 cu in)
* Bore: 82.7 mm (3.26 in)
* Stroke: 91 mm (3.6 in)
* Power (A20A1):
o 98 hp (73 kW)
o 109 ft·lbf (148 N·m) at 3500 rpm
stat1K
09-13-2009, 07:48 AM
looks like edm markers and front end to me... could be wrong though :(
epic1400cs
09-28-2009, 06:16 AM
Hi welcome to 3geez.
Your car looks great (err, except that wing :D ).
I am sure your car is from continental Europe (I don't know which but not UK=RHD) because yours has steering wheel on the left. If this is from Japan, it should be on the right. But, all the European model were also made in Japan and exported to EU so, you could say it was made in Japan!
Nafs Asdf
09-28-2009, 08:25 AM
My bet would be on it being neither edm or jdm but rather a South American model. Europe didn't get those corners, we have the ugly clear reflectors. Also I'm under the impression that japan didn't have fixed light ones before 88 (might be wrong on this one), and jdm 88-89s would have clear corners.
epic1400cs
09-28-2009, 09:28 AM
Naf's, thats good point, I didn't realized there is difference.
I am looking at the workshop manual and if this is South America model;
the area code is KP (MAY include Philippines, Lebanon, Peru, El Salvador, Dominica, Ecuador, Guatemala, Nicaragua, Paraguay, Iran, Honduras, Venezuela, Costa Rica, Ethiopia, Bolivia, Kuwait, Martinique, Guadeloupe, Curacao, Greece, French Guiana, Bahrain, Saudi Arabia, Somalia, Fench Somalia, Brazil, Viet Nam).
KP model have the speedo with km/h and left handle.
4D EX model with A20A2 from KP comes with Power Steering, Power Window and some EX model come with Sun Roof.
weight distribution is (front/rear) 670/435kg or 679/444kg with Sun Roof
Can you check your car's spec and let us know if any is different.
fijisac
09-28-2009, 11:07 AM
well u have very nice looking car and i wish my 89 had looked like dat but the wing has got 2 go ir some1 will make fun of you like dis
http://www.youtube.com/watch?v=Q2ak20tWPVo
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.