PDA

View Full Version : I need some pointers with power door locks



DarknessRS
05-09-2002, 12:13 PM
I'm installing a power door lock kit in my coupe and was wondering if anybody has any tips/advice about how to go about doing it.

TeKKnoTeKK
05-09-2002, 12:38 PM
wish I did bro, sorry.....goodluck

catalin
05-09-2002, 08:47 PM
Originally posted by DarknessRS
I'm installing a power door lock kit in my coupe and was wondering if anybody has any tips/advice about how to go about doing it.

Take the door panels off.
Run a couple of wires into each door.
When you remove the door you will see two metal rods that move back and forth when you lock/unlock or pull the door release.
Connect and mount the actuators in the door, they must be parallel to the one locking rod.
Make your connections to the alarm/keyless entry module using replays unless they are built in.

Hope this helps a little, any questions, just ask.

HostileJava
05-10-2002, 07:21 AM
Where'd you get the power doorlock kit/how much was it? Are these common, i didn't know you could get them.


Originally posted by DarknessRS
I'm installing a power door lock kit in my coupe and was wondering if anybody has any tips/advice about how to go about doing it.