I was wondering do the front frame that holds the head lights come off

[Dat88Monstar]

my frame is smashed on the passager side and i was wondering would i have to get it cut off or could i just remove screws and it will come off? Any help will be okay at this point but i got the whole front off and got tired ill get pics

[Hondamonster]

should be a ton of spot welds. thats how most radiator supports/front nose cuts of hondas are held on as far as i know. strip all the parts off your car and look at the frame. there should be a bunch of little indentations around where the frame pieces meet. thats where the robots welded when it was first assembled. get a drill bit larger than the indentations and drill all the way through the layer you're removing. there are probably around 50 of these. then get a straight car from the junk yard and do the same thing. take the new nose home and weld it in place good and straight and you're set.

[lostforawhile]

the buckets that hold the lights unbolt from the car, and the top radiator support comes off with bolts.

[Dat88Monstar]

this is what my car frame looks like without the bumper and stuff

http://img223.imageshack.us/img223/1059/sany0393edited1.th.jpg (http://img223.imageshack.us/i/sany0393edited1.jpg/)


http://img210.imageshack.us/img210/4938/sany0394b.th.jpg (http://img210.imageshack.us/i/sany0394b.jpg/)


http://img62.imageshack.us/img62/691/sany0395.jpg (http://img62.imageshack.us/i/sany0395.jpg/)http://img62.imageshack.us/img62/sany0395.jpg/1/w640.png (http://g.imageshack.us/img62/sany0395.jpg/1/)

[Dat88Monstar]

A few other shots of my taz

http://img148.imageshack.us/img148/2343/sany0229v.jpg (http://img148.imageshack.us/i/sany0229v.jpg/)http://img148.imageshack.us/img148/sany0229v.jpg/1/w640.png (http://g.imageshack.us/img148/sany0229v.jpg/1/)


http://img514.imageshack.us/img514/7547/sany0228.jpg (http://img514.imageshack.us/i/sany0228.jpg/)http://img514.imageshack.us/img514/sany0228.jpg/1/w640.png (http://g.imageshack.us/img514/sany0228.jpg/1/)


http://img269.imageshack.us/img269/9749/sany0203o.jpg (http://img269.imageshack.us/i/sany0203o.jpg/)http://img269.imageshack.us/img269/sany0203o.jpg/1/w640.png (http://g.imageshack.us/img269/sany0203o.jpg/1/)

http://img180.imageshack.us/img180/5497/l32791f4362e405bee777a5.jpg (http://img180.imageshack.us/i/l32791f4362e405bee777a5.jpg/)http://img180.imageshack.us/img180/l32791f4362e405bee777a5.jpg/1/w600.png (http://g.imageshack.us/img180/l32791f4362e405bee777a5.jpg/1/)

[Dat88Monstar]

Im going take the bolts off and see what i get i hope i dont have to weld anything

[lostforawhile]

I see you have integra sawblades painted with duplicolor wheel paint just like i was running

[Dat88Monstar]

yeh i have a pair of racing hart f24 i got from craigslist for 20 dollars and now i cant find another pair lol well i found some but im not paying 1500 for them

[Civic Accord Honda]

i like the pin striping on the bumper looks dope!

but yeah the radiator is spot welded in :(

[LewZur]

I see you have integra sawblades painted with duplicolor wheel paint just like i was running


I want a set of those for my ol' blue.

[Dat88Monstar]

Yeh its welded imma have to wait to repair untill taxes lol im going to get a welder from wal mart or ebay plus i plan on a swap so any welding exp i can get will be good lol thanks for all of you guys help

[Dat88Monstar]

everybody like those lol im thinking about selling the blades or trading

[fijisac]

quick question, where did u get those side markers from?

[Dat88Monstar]

I got them from a shop out here called vegas speed i payed 40 dollars for them why?

[lostforawhile]

lots of cars have lights like that oem from the factory should be able to find some in a yard without too much trouble.