PDA

View Full Version : 82-86 dodge charger wheels pics please?!?



reallylowaccord
10-22-2009, 02:14 PM
i kno they will fit but didnt know if anyone is running them and if you are can u post your pic? (i know im a noob but i did try a search) anyway, my buddy is restoring a 83 dodge charger shelby 2.2 turbo and will sell me the stocks with good tires for just $50 i need to get one tire plugged and one new valve stem. its a good deal and better than stock but if the offset is to big then i ant go as low as i would like

import racer
10-22-2009, 03:16 PM
Should fit good,I was gonna try those years ago but could not find any.Are they the ones with holes around the outside or with holes over the whole rim.

reallylowaccord
10-22-2009, 04:03 PM
the solid ones with holes around the outside

Civic Accord Honda
10-22-2009, 04:23 PM
pics never seen one

Joay
10-22-2009, 04:52 PM
These (http://upload.wikimedia.org/wikipedia/commons/5/50/Plymouth_Duster_EEK.jpg)?

gp02a0083
10-22-2009, 04:53 PM
i believe he is talking about a dodge daytona shelby , they did come in cobra shelby trim too with a turbo and a 2.2 also if i remember right

reallylowaccord
10-22-2009, 05:31 PM
i have to have more than 4 posts to put a pic up so here is #3

reallylowaccord
10-22-2009, 05:32 PM
#4

reallylowaccord
10-22-2009, 05:32 PM
#5

reallylowaccord
10-22-2009, 05:33 PM
ok finally here u go haha
http://img36.imageshack.us/img36/8808/shelbycharger1.th.jpg (http://img36.imageshack.us/i/shelbycharger1.jpg/)

thats the charger they are 4x100

import racer
10-23-2009, 09:53 AM
Yeah those are the ones that are 15"

Civic Accord Honda
10-23-2009, 10:06 AM
These (http://upload.wikimedia.org/wikipedia/commons/5/50/Plymouth_Duster_EEK.jpg)?
ewwwwwww


ok finally here u go haha
http://img36.imageshack.us/img36/8808/shelbycharger1.th.jpg (http://img36.imageshack.us/i/shelbycharger1.jpg/)

thats the charger they are 4x100

:D thoses would look pretty good slamed!

reallylowaccord
10-23-2009, 12:51 PM
thanks guys i hope they will look good!

Bluntman
10-23-2009, 02:33 PM
They are 13x5.5:ugh:http://www.discountedwheelwarehouse.com/Dodge___Vehicle_Bolt_Pattern_Reference.cfm

import racer
10-23-2009, 07:40 PM
They are 15" on the shelby and daytona.

Bluntman
10-24-2009, 05:51 AM
They are 15" on the shelby and daytona.

I should have paid attention to the chart. My mistake:cheers: