PDA

View Full Version : B21 Header???


SOHCinWA
10-24-2009, 07:02 PM
Sorry guys. I am noob when it comes to "Ludes" Been playing with D 's , B's , and F's. This is my first time with the Funky B21's. Any help so far would be great. Thanks
Joay
10-24-2009, 09:03 PM
Chikara and Pacesetter are the only two I know of that make headers for the Prelude B20/B21. You'll find a lot more information about BA Ludes at Prelude Power (http://preludepower.com/forums/forumdisplay.php?f=197) though.
The second-generation Preludes are the ones that share engines with 86-89 Accords.
SOHCinWA
10-24-2009, 09:52 PM
So what you are saying is that the B20a engine will also fit the B21???
stat1K
10-24-2009, 10:21 PM
don why are you asking prelude questions on 3geez.com? you need to be on pp

go back to d-series TROLL!
2ndGenGuy
10-24-2009, 10:55 PM
The B20A engine will fit the B20A better.
SOHCinWA
10-25-2009, 07:59 AM
don why are you asking prelude questions on 3geez.com? you need to be on pp

go back to d-series TROLL!

Have not been on D series in years.. But thanks
stat1K
10-25-2009, 12:12 PM
ok ok onecamonly sorry, i just remember you from d-series lol... love your sedan!
Joay
10-25-2009, 12:16 PM
So what you are saying is that the B20a engine will also fit the B21???
Yeah the JDM B20A (87+ Prelude B20A, not the Accord B20As we have at this site) and USDM B20A3/B20A5/B21A1 can use the same header I'm pretty sure. I haven't owned a Prelude for a couple years so corroborate that at PP.

[Edit] The B21 has one oxygen sensor, whereas the B20AX has two. But the flange is the same so it'll bolt up.
ghettogeddy
10-25-2009, 12:19 PM
by pp he means www.preludepower.com
Civic Accord Honda
10-25-2009, 12:32 PM
pics of said sedan.
SOHCinWA
10-25-2009, 03:12 PM
Since I dont have enough posts, I cannot post pics yet..
SOHCinWA
10-25-2009, 03:12 PM
I will try again later
SOHCinWA
10-25-2009, 03:15 PM
Ok... Here are some pics of my sedan that my wife races..

http://i88.photobucket.com/albums/k165/D15b-EF/Engine/Engine017.jpg

http://i88.photobucket.com/albums/k165/D15b-EF/Engine/Engine019.jpg

http://i88.photobucket.com/albums/k165/D15b-EF/Engine/Engine022.jpg

http://i88.photobucket.com/albums/k165/D15b-EF/Cars/chrispics001.jpg

http://i88.photobucket.com/albums/k165/D15b-EF/Cars/chrispics095.jpg

http://i88.photobucket.com/albums/k165/D15b-EF/Cars/chrispics122.jpg
cubert
10-25-2009, 03:33 PM
Badass little car right there :thumbup:

The header is a work of friggin art...
stat1K
10-25-2009, 03:59 PM
mmm carb'd civic running great times!

btw love the hot pink, i haven't seen it since it's been pink lol... diggin it for sure.
SOHCinWA
10-25-2009, 04:12 PM
Thanks for all of the comments about "Pinky"... It has been a long road. And still going forward with the f22 project.

But I am just trying to get info on my daily driver. Hopefully the b20 header will fit my b21.
Thanks again everyone
Civic Accord Honda
10-25-2009, 05:24 PM
nice!!!! <3 pink too!
i found your thread shortly after asking over on hondabuild about hte carbed d thats pretty sick man...

what are theses F plans i here about?
cubert
10-25-2009, 05:37 PM
nice!!!! <3 pink too!
i found your thread shortly after asking over on hondabuild about hte carbed d thats pretty sick man...

what are theses F plans i here about?


If i remember correctly, its N/A with lotsa lotsa power :D
Civic Accord Honda
10-25-2009, 05:38 PM
If i remember correctly, its N/A with lotsa lotsa power :D

Do Like!! :thumbup: :cheers:
2ndGenGuy
10-25-2009, 09:38 PM
That is one of the coolest engines I have ever seen.
LX-i
10-26-2009, 09:56 AM
Since I dont have enough posts, I cannot post pics yet..

sorry this is WAYYY off topic but....

YOU HAVE A GMC TYPHOON?!
does it look good? run?

my god do not ever sell that truck.
Hondamonster
10-26-2009, 07:06 PM
ok here's the deal- for the third gen prelude b20 (b20a b20a5 b21a b21a1) everything externally will bolt up. the difference will be in the o2 sensor bungs. 88-89 preludes are obd0 and have two single wire o2's up on the header section. 90-91 preludes are obd1 and have a single four-wire o2 between the flex pipe and the cat. dimensionally, they're the same. all you'd have to do is either convert the o2's. basically speaking, only the differences between the b20's and b21's is the bore and the slight manifold differences related to the obd system of the respective year.

proof of above knowledge/things i made up
http://i141.photobucket.com/albums/r63/hondahutch/1018091545.jpg
:)
SOHCinWA
10-26-2009, 08:25 PM
sorry this is WAYYY off topic but....

YOU HAVE A GMC TYPHOON?!
does it look good? run?

my god do not ever sell that truck.

Yes I do have a Typhoon. 99k miles on a 92. Perfect in and out.


ok here's the deal- for the third gen prelude b20 (b20a b20a5 b21a b21a1) everything externally will bolt up. the difference will be in the o2 sensor bungs. 88-89 preludes are obd0 and have two single wire o2's up on the header section. 90-91 preludes are obd1 and have a single four-wire o2 between the flex pipe and the cat. dimensionally, they're the same. all you'd have to do is either convert the o2's. basically speaking, only the differences between the b20's and b21's is the bore and the slight manifold differences related to the obd system of the respective year.

:)
Thanks ... I thought so.
LX-i
10-27-2009, 05:07 AM
Yes I do have a Typhoon. 99k miles on a 92. Perfect in and out.



wow thats crazy....i want to see pics, you should post up pics in a different thread.
MessyHonda
10-28-2009, 12:15 AM
sweet pics
ZackieDarko
10-29-2009, 07:47 PM
Same SOHCinWA from d-series?????
2drSE-i
10-29-2009, 07:59 PM
Same SOHCinWA from d-series?????

dunno about d-series, but same SOHCinWA from Onecamonly
stat1K
10-30-2009, 08:28 AM
yeah it's the same one.