Pinhole leak in radiator

[jg09]

There's a tiny hole in the top plastic piece of my radiator. It truly is the size of a pinhole, but it does create problems. Would fiberglassing over the hole work for a while? I don't really want to replace the whole radiator for such a little hole. I tried to slow it down a little by putting Gorilla Tape on it, but that didn't help at all. Any other possible ideas to fix it for a while? I don't mind if it's something that has to be re-applied/redone once a month or so.

[w261w261]

There's always Bars:

http://www.barsproducts.com/barsleaks_products.htm

[Oldblueaccord]

JB weld makes some weld for plastic.

Personally I drove around with the rad cap loose enough just to keep the fluid from spilling out for more then a yeah with out any problems.

I'd imagine the hole is on the oppsite side of the top radaitor hose?

wp

[jg09]

JB weld makes some weld for plastic.

Personally I drove around with the rad cap loose enough just to keep the fluid from spilling out for more then a yeah with out any problems.

I'd imagine the hole is on the oppsite side of the top radaitor hose?

wp

It's about an inch to the right of the cap

[jg09]

a buddy of mine has some JB plastic weld. I'll try that