View Full Version : Pinhole leak in radiator
There's a tiny hole in the top plastic piece of my radiator. It truly is the size of a pinhole, but it does create problems. Would fiberglassing over the hole work for a while? I don't really want to replace the whole radiator for such a little hole. I tried to slow it down a little by putting Gorilla Tape on it, but that didn't help at all. Any other possible ideas to fix it for a while? I don't mind if it's something that has to be re-applied/redone once a month or so.
w261w261
11-08-2009, 12:11 PM
There's always Bars:
http://www.barsproducts.com/barsleaks_products.htm
Oldblueaccord
11-08-2009, 12:23 PM
JB weld makes some weld for plastic.
Personally I drove around with the rad cap loose enough just to keep the fluid from spilling out for more then a yeah with out any problems.
I'd imagine the hole is on the oppsite side of the top radaitor hose?
wp
JB weld makes some weld for plastic.
Personally I drove around with the rad cap loose enough just to keep the fluid from spilling out for more then a yeah with out any problems.
I'd imagine the hole is on the oppsite side of the top radaitor hose?
wp
It's about an inch to the right of the cap
a buddy of mine has some JB plastic weld. I'll try that
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.