View Full Version : Swaping In a B Series motor into a Carb'ed car?
Ju_S12_Turbo
11-26-2009, 02:42 AM
I was running over the carb to efi thread and saw the fuel tank difference. My main question is if I swap over to the B-series motor would I still need to either A :swap my fuel tank. or B:modify it so it can take a different fuel pump? Sorry if this is a noob type of question or if it has been asked (But I did search first lol). Main reason I ask is I just read that innovatives now makes the mounts again so the thought popped into my head and I thought I should ask.
Thanks for all the help
Nafs Asdf
11-26-2009, 02:47 AM
You would need EFI fuel lines/tank or you could run the B-series carbed ;)
carotman
11-26-2009, 05:21 AM
The fuel tank is the least of your worries when doing such a swap :D
itzdave
11-26-2009, 02:28 PM
get the b series and run a weber 38/38!
Ju_S12_Turbo
11-26-2009, 03:01 PM
The fuel tank is the least of your worries when doing such a swap :D
haha well this is true, But the main thing I was worried about was the mounts but those are back :D. But it would suck to get everything in then not be able to get fuel lol.
You would need EFI fuel lines/tank or you could run the B-series carbed ;)
Ok so I would still need to do all that as well. Damn lol. haha just rock some itb's
itzdave
11-26-2009, 03:03 PM
you can use the A20 carbd intake manifold on it, with the weber...
Ju_S12_Turbo
11-28-2009, 03:15 PM
Hmmmm rocking a B with a carb on it. Well that might be a Idea, but before that I need to get the Engine bar'd since it is really not that hard. gah, well maybe I'll just drop the tank and see what needs to be modified
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.