View Full Version : Another VR Problem!!
b_radsmizzle
12-11-2009, 09:51 AM
Any reasons for the car revving to basically WOT at idle after completing stage 1 vac removal
I'm pretty sure everything is done according to the diagram
1988 LX a20a1
2oodoor
12-11-2009, 11:12 AM
check your secondary throttle is not slightley open at idle
check your fast idle setting for choke
\what rpm is your "WOT" issue?
b_radsmizzle
12-12-2009, 11:50 PM
i shut it off when it redlines. i'm not sure if the carbed a20 has a rev limiter
but it seems like it would keep going
A20A1
12-19-2009, 12:10 AM
is your idle diaphragm still installed?
if there is no vacuum to the idle diaphragm it will rev out of control.
The idle diaphragm relies on manifold vacuum... don't connect it to venturi vacuum, also make sure the secondary barrel is not connected to intake manifold vacuum.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.