Anybody know what the part number interchanges are for these hoses?

[LewZur]

I need two hose for my Honda. The Honda part numbers are 19510-PH3-000 and 19511-PH3-000. According to the Gates website there's not an interchange for these two hoses. Just wondering if anyone knew otherwise.

[2oodoor]

ok without getting out my pocket microfish screen and locating those, what do they go to?? :D

[LewZur]

:lol: here's a pic for reference

http://i643.photobucket.com/albums/uu155/3rdGenDX/87%20Lude/458976-1.png

[Civic Accord Honda]

hard to tell from pic but do thoses run to the thouttel body? if so just get some hose the same size from napa , works great thats what ive allways done (thoses old hoses love to burst on me)

[Bluntman]

One is throttle body hose, the other is PCV heater hose. Do what he ^^ said. Or part numbers are still active and available. I just changed alot of hoses. If you go dealer ask them for level 4 pricing ( in a nice way) and it will save some money.

[LewZur]

I guess I'll have to go to the dealer it's about 100 miles from me. I don't want to use regular hose as these are molded hoses. I cannot believe Gates doesn't make these hoses.

[LewZur]

One is throttle body hose, the other is PCV heater hose. Do what he ^^ said. Or part numbers are still active and available. I just changed alot of hoses. If you go dealer ask them for level 4 pricing ( in a nice way) and it will save some money.


BTW what's level 4 pricing?

[2oodoor]

those are replaceable with generic hose, just get enough so you can run them without kinks, use worm style hose clamps. Use a grade hose that will withstand the heat and coolant.

[Bluntman]

I guess I'll have to go to the dealer it's about 100 miles from me. I don't want to use regular hose as these are molded hoses. I cannot believe Gates doesn't make these hoses.

Do not drive a hundred miles. Just take them to NAPA or a good parts store and ask them to match it with something, maybe you can find bent hose that will work. Or do what he said.^^^^^ and get generic hose.

[Dr_Snooz]

I got those from Napa. They list them on the website.

[Bluntman]

Since it is only hoses, I did a Pep Boys cross reference for you. Both hoses are part# 86800.
http://i19.servimg.com/u/f19/12/59/29/63/hose10.jpg (http://www.servimg.com/image_preview.php?i=699&u=12592963)

[A20A1]

I agree with getting hoses with a matching bend or longer hoses from NAPA and just running longer radius bends to avoid crimps.

Then again if you absolutely need a tight bend and don't have molded hoses that fit use straight tubing with 45* or 90* elbows that can withstand the temp/coolant. The only real negative thing is you'd need more clamps and that means more places for potential leaks later on.

Still, if you can get a hold of the factory replacement part for a reasonable price then all the better.

[Bluntman]

Did you get your hoses?