PDA

View Full Version : any intake suggestions for 89 lxi?



jonmo
02-07-2010, 12:53 AM
my car is completely stock and i just want to get a little more horsepower.
i saw a weapon r dragon intake online and was thinking about getting one, but wasn't sure how good it is.

what are some other good intakes out there for my car?
i've got about $200 to spend.

Joay
02-07-2010, 10:33 AM
Hey what's up, welcome to the board.

$200 for an intake is ridiculous aside from stuff like ARC and Password, but they don't make anything for us. Get a cheap, generic intake from eBay for a 90-93 Integra or 98-02 (I think) Accord and cut it to fit. Then go get a conical filter from any auto parts place and you're done. Whole thing shouldn't be more than $50.

Rendon LX-i
02-07-2010, 12:07 PM
x2 im getting one here in a bit DA teg CAI. for 42 shipped with filter. no need for 200 buck bs.

Civic Accord Honda
02-07-2010, 12:47 PM
ebay intake ftw, if u live in cali just throw the stock intake back on when u take it in for smog checks.
and btw i recommend short ram intake over cold air, cold air gets u more torque and response is about the same and you risk hydrolocking your engine... short ram u lose a tiny bit torque but gain alot of response and you never have to worry about hydrolocking it

2drSE-i
02-07-2010, 02:04 PM
90-02 Accord
86-89 Integra
Most Civic years

With that being said, most of these require adding another cut (easy to do with a hacksaw) and turning one of the pipes. You will also need to move your battery around a bit. Nothing anyone couldn't handle. Heres an ebay link
http://cgi.ebay.com/ebaymotors/90-91-92-93-Honda-Accord-DX-LX-EX-2-2L-Cold-Air-Intake_W0QQcmdZViewItemQQhashZitem2eaaca0f41QQitem Z200433864513QQptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fA ccessories#ht_2740wt_907

This one is the best bet. Even comes with the tube to hook up to your valve cover. I don't remember them being this expensive, but the cost of aluminum has skyrocketed.

What i will suggest is throw away the shitty filter they send with it, and get an AEM Dryflow. Easy to clean, no need to oil, and a GREAT filter.

Feel free to PM me with any other questions you might have buddy.

Pico
02-07-2010, 03:50 PM
Welcome to the forum.
my CAI came out of a 6th gen Accord.

jonmo
02-08-2010, 05:12 PM
Thanks guys, that really helps a lot.

ACE_14
02-10-2010, 09:27 PM
Ebay's got intakes for 87 Prelude, same engines as us. It should be a direct fit.

2drSE-i
02-10-2010, 09:31 PM
Ebay's got intakes for 87 Prelude, same engines as us. It should be a direct fit.

Same engine, yes, but different body, which is the main issue that deals with fitment.

ACE_14
02-12-2010, 07:40 PM
I went to a Pick your Part today and was lucky enough to find one of the 87 Prelude intakes I mentioned just sitting on a car. No filter or coupling though. I held it up on a 3G there and it WILL work. It places the filter right next to the Proportioning Valve. Best part of it is that with the 50% off sale today, I only paid $1.50 for it.