PDA

View Full Version : Help me recognize these..


ADRIANFARINA
03-12-2010, 02:44 AM
I have this vaccum hose
http://www.pic.co.il/Files/A389AD0CCF05407982435B032041DED6/orig_87555A60CAF8441284B6CBBF8E8D8150.JPG
it comes from the two right hand sensors and connects into one tube..

the scheme of the vaccum shoes it should connect somewhere arround the carb
http://www.pic.co.il/Files/A389AD0CCF05407982435B032041DED6/orig_08215B92551643FAB68B581F4A74C85D.JPG

also , what is this for?
http://www.pic.co.il/Files/A389AD0CCF05407982435B032041DED6/orig_A7480DB8BF344F50A2A1F70B535C67B8.JPG

thanks:rolleyes:
carotman
03-12-2010, 05:44 AM
LOL at the tilt steering lever...
stephensimmons
03-12-2010, 08:25 AM
That lever is for the fresh air vents if im not mistaken.
nswst8
03-12-2010, 08:43 AM
Carotman is right it is the Steering wheel locking lever. It locks the steering wheel after you adjust the up/down position.
russiankid
03-12-2010, 10:14 AM
According to the vacuum diagram, that looks like the vacuum secondary diaphragm.
ADRIANFARINA
03-12-2010, 01:23 PM
According to the vacuum diagram, that looks like the vacuum secondary diaphragm.

wich means?

btw , my steering wheel isn't moving ...
ghettogeddy
03-12-2010, 02:59 PM
wich means?

btw , my steering wheel isn't moving ...

pull the lever out the push down (not back in)

that will releases the wheel

then you have to pull it it out and pull up to lock it back in place
A20A1
04-19-2010, 09:11 AM
Nah the secondary diaphragm is #28, #20 goes to the idle/throttle controller.

Probably one of those is a solenoid to leak in air and decrease vacuum to the diaphragm to raise the idle.