PDA

View Full Version : change to heavier oil so burn less?



rebuild
06-16-2010, 07:12 PM
Getting oil-soot on back of bumper. (516k miles) Someone said to go to a heavier weight oil - would you agree? I run Castrol 10W40. What would you recommend going to?

ShyBoyCA6
06-16-2010, 08:34 PM
I never heard of a 3G burning oil and no 10 30W is good for these cars or 40w too no higher and we already have a thread about oil weight

rebuild
06-16-2010, 08:40 PM
I'll go hunt for the thread if it addresses this problem. I have seen 3Gs burning oil badly before and over time those rings wear and from what I hear, the cylinders can become oval-shaped which can allow oil to get burned. It happens.

cygnus x-1
06-17-2010, 09:25 AM
Getting oil-soot on back of bumper. (516k miles) Someone said to go to a heavier weight oil - would you agree? I run Castrol 10W40. What would you recommend going to?



I know it's a Honda, but damn! That's a lot of miles. Go ahead and try some 20W50 and see if it helps. It won't hurt anything, except it might crank slower when it's really cold out.


C|

gp02a0083
06-17-2010, 09:41 AM
that and with the 20w-50 you might see higher oil pressures more so when the engine is cold

LxAcc510
06-17-2010, 01:33 PM
I've been told to use 20w50 only if you do a lot of high end with the revs..otherwise it'll be too heavy? :dunno: