m/t mount... where does this go?

[POS carb]

Trying to figure out where this part goes b/c my car doesn't have one (a/t to m/t swap)

http://www.hondaautomotiveparts.com/auto/jsp/mws/catimgs/13se001_b47.png

parts # 14,15,&16

Any got a pic? Thanks!

[Pico]

thats the A/T mount, I tossed mine when I did my swap.
M/T does not use that mount

[CzEcHy]

Wait the auto trans has a tranny mount..

Ugh, I have an 88' automatic, do I have that mount, and where is it..?

(As in, who sells it, and where does it mount.)


I was always told we only had err, part 3,8,2..

[itzdave]

is the mount under the car? i just did the 5spd swap a month or so but i don't recognise that one...

[A18A]

i dont see the pic

[Bluntman]

Trying to figure out where this part goes b/c my car doesn't have one (a/t to m/t swap)

http://www.hondaautomotiveparts.com/auto/jsp/mws/catimgs/13se001_b47.png

parts # 14,15,&16

Any got a pic? Thanks!
Here are the pics of 14, 15 and 16 on my 88 LXi automatic. #16 is the "Rubber, Transmission Mounting insulator". Part# 50852-SE0-A01. Mine was torn and I replaced it. It is on the passenger side looking down, below the prop valve. Again this in on a automatic transmission.
http://i69.servimg.com/u/f69/12/59/29/63/tranny10.jpg (http://www.servimg.com/image_preview.php?i=738&u=12592963)

[A18A]

whoa :O i never even knew a mount existed between the gearbox and side of the car. none of my cars (auto & manual) ever had them

[itzdave]

yea, neither did mine...

[CzEcHy]

I'll need to go verify this, and maybe get a new one (transmission moves around alot during idle)