Bent up light assembly

[Ayeobe]

How hard would it be to replace the light assembly? I noticed the motor arm looks like its rivvited on. I need to ither replace it or bend it back into shape, and im wonderin how hard it is to just replace it. I have the part, its on the other car, but if bending it is gona be easyer, ill bend it back into shape.

Few pics of the issue:
http://i5.photobucket.com/albums/y188/aob19/Cimg0406-1280.jpg
http://i5.photobucket.com/albums/y188/aob19/Cimg0403-1280.jpg
http://i5.photobucket.com/albums/y188/aob19/Cimg0405-1280.jpg
http://i5.photobucket.com/albums/y188/aob19/Cimg0404-1280.jpg

[labeledsk8r]

not to hard at all, the entire unit can be pulled out and a new one can be placed back in

[Ayeobe]

What tools would you use? I dont see any bolts holding the motor arm onto the light assembly, but ill take a closer look. Thanks. I hope to replace it tomorow, if its as easy as you say.

[charliekuney]

I believe it's easier to take the arm off of the motor, and let the arm go with the bucket. I think the bucket itself is just held in by a couple of bolts. Be warned, it's pretty ugly trying to keep the bucket aligned.

[Bluntman]

Yes the arm disconnects from the motor. And for your future reference the motor assembly does unbolt from the wall. Here is a pic to get a idea. Hope this helps a bit.
http://i39.servimg.com/u/f39/12/59/29/63/headli10.jpg (http://www.servimg.com/image_preview.php?i=742&u=12592963)

[carotman]

Replace the whole thing or it will never line up properly

[Ayeobe]

Alright, ill figure out exactly what to undo to take the thing apart. Im prety sure ill be able to get the assembly out, im just worried about the motor arm.