escort wheels

[InAccordance]

early 90's 4lug escort wheels fit with no prob right? Pretty sure they do, just need some verification.
Found a set in great shape with new tires for $100, would like to jump on em, but wanted to double check.

[Pico]

as long as they are 4 x 100 and the center hole isnt too small you be ok

[Civic Accord Honda]

yeah they should fit no problem

[InAccordance]

aight cool
thought i saw someone running around with the 3 spoke escort wheels on here somewhere but couldnt remember who it was.

[charliekuney]

^ Nio.

[Civic Accord Honda]

the 90 gt ones look best imho

[InAccordance]

i think thats what these are... the ones with a like 8 or 10 spokes, not the fat 3 spoke ones.

[Civic Accord Honda]

http://www.productioncars.com/send_file.php/ford_escort_gt_red_2_1990.jpg
http://farm2.static.flickr.com/1170/536682919_7b91b5f6a4.jpg
those = sex

[lostforawhile]

hey there's my spoiler!! mine came off an escort gt though, they fit great on the hatch with a little mod to clear the wiper

[mykwikcoupe]

pics of the spoiler on the hatch and total fitment?

[lostforawhile]

pics of the spoiler on the hatch and total fitment?

http://losts86hatch.tripod.com i need to update since some of my pictures don't work but look on my sidebar for spoiler project page,edit main page look for the spoiler and click on it

[InAccordance]

@CAH - not those, but the next gen after those that look alot like em... i saw some today on an escort and it's 7 spokes.
these - http://en.wikipedia.org/wiki/File:Ford_Escort_LX_hatch.jpg

@lost - I ganked a spoiler off a 3g at the yard the other day, 15 bucks:rockon:

[Civic Accord Honda]

those are fresh too but i still like the older ones better, but both pwn stock!

[InAccordance]

and def pwn dirties

[InAccordance]

well shit, found out the escort center bore is 54.1mm, where as our accord is 56.1mm.... so a mere 2mm makes them not fit :uh:

[lostforawhile]

well shit, found out the escort center bore is 54.1mm, where as our accord is 56.1mm.... so a mere 2mm makes them not fit :uh:

where are you located? if you were closer i would chuck them in the lathe and turn a couple of MM's out of them like i did for the ones i used to have, i made a tool out of a hub that lets you chuck the entire rim in the lathe

[2oodoor]

yes the center should not be to hard to file out, your lugs are what centers the wheel as long as it will lay flat on the hub mating surface.
Generally speaking too, if these are 14 or 13 inch you should be aware of 88-9LXi brake clearance being a potential issue.

[InAccordance]

@lost - johnson city TN

@ roo - they're 14", i have an LX so brake clearance shouldnt be a problem