PDA

View Full Version : tranny help


prince_frog
12-20-2010, 12:01 PM
Im doing a auto to 5spd swap. I have read in the other post what I needed but it doesn't include the starter and I was just wandering if I needed the 5spd starter or the automatic transmission starter would work fine? Let know guys. Thanks
charliekuney
12-20-2010, 12:15 PM
The people who post those kinds of threads are usually very complete, so I'm guessing since they didn't post that a different starter was needed you're fine with the original. I think the two different starters for these cars is carbureted versus fuel-injected.
prince_frog
12-20-2010, 12:39 PM
probably, thanks alot though. If anyone reading this can answer one more question is- How do i go about removing the crank pulley, I notice the usual honda crank pulley tool cant be use. How would you go about removing the crank pulley? Any information would help alot.
import racer
12-20-2010, 02:36 PM
There is a difference,the manual starter is adjustable .The auto one is not,but it may work.I think the nose piece can be inter-changeable.
shepherd79
12-27-2010, 07:12 AM
the only difference in starters is the nose piece. change that out and you will be fine.
lostforawhile
12-27-2010, 08:52 AM
the only difference in starters is the nose piece. change that out and you will be fine.

I was thinking the bolt holes were different, i looked at the manual and it shows three different starters, one is for the European models, and two for the US models, I think the auto and manual are different. all three are different models
prince_frog
12-27-2010, 10:50 AM
I have a question regarding this hose thing on the transmission. Where does this hose go?
prince_frog
12-27-2010, 10:54 AM
i have a arrow pointing to it?
lostforawhile
12-27-2010, 11:01 AM
I have a question regarding this hose thing on the transmission. Where does this hose go?
picture? on the manual? it's probably the vent hose
prince_frog
12-27-2010, 11:06 AM
the hose is above the the clutch fork, clutch cable connection. Does this hose connect to anything?
http://www.torontojdm.com/images//pi_4226.jpeg
lostforawhile
12-27-2010, 11:08 AM
thats just a vent, it doesn't go to anything,it needs to stay over like that to prevent water from getting in
prince_frog
12-27-2010, 11:10 AM
oh ok thanks